Jump to content
Brian Enos's Forums... Maku mozo!
Localizer

Correcting .40cal Tanfoglio short chambers

Recommended Posts

I have two pistols a Stock II & Witness match that need the throat treatments my 9mms have gotten.

 

Can anyone recommend a smith I can ship barrels to?

 

Thanks in advance.

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
Posted (edited)

Looks like prices went up, its $30,,, they charge you more then issue a refund once they come back, can load a dummy round with long loaded ammo to what ever spec you want and use that as a go gauge.
Be advise, not sure of that platform, but your mags may be the OAL limiting factor. 

https://4drentals.com/products/reamer-rentals/

Edited by Joe4d

Share this post


Link to post
Share on other sites

This is for a .40cal.

Neither Beven nor Patriotdefense offer this service for this caliber.


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Tanfo's normally have a smaller grove dia, than standard bbl's

So you need to size your bbl first or go through a smith who knows tanfo's

Share this post


Link to post
Share on other sites

Tanfoglio in 40sw normally doesn’t need the chamber reamed it’s plenty deep enough to load most bullet profiles pretty long. The problem normally is reliable feed because of bullet nose profile and the 40 mags limit the length. 

 

I have two Tanfoglios in 40, Limited and the S2, neither of which has length issues. I found they feed a more round nose profile better, Blues work great, and the 10mm mags are the answer to the mag restrictions.

Share this post


Link to post
Share on other sites
Posted (edited)

10mm mag is a must for longer loads.

Edited by Yagi

Share this post


Link to post
Share on other sites
2 hours ago, mach1soldier said:

Message me. I can do both of them for you in .40 caliber.

 

Many thanks Sir. Message Sent!

 

I must be unliucky...both of mine wont plunk rounds my glock & FNP plunk...Mags are a non-issue for me.

Share this post


Link to post
Share on other sites

I load my 40sw to 1.140 +-.002 with flat point bullets. No issues in two of my Limited models

Share this post


Link to post
Share on other sites

Call Patriot Defense and see if they can do the 40. They did both of of my 9mm chambers and they turned out great.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...