Localizer Posted August 27, 2019 Share Posted August 27, 2019 I have two pistols a Stock II & Witness match that need the throat treatments my 9mms have gotten. Can anyone recommend a smith I can ship barrels to? Thanks in advance. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Joe4d Posted August 27, 2019 Share Posted August 27, 2019 rent a reamer for $20, Link to comment Share on other sites More sharing options...
Localizer Posted August 27, 2019 Author Share Posted August 27, 2019 rent a reamer for $20, From whom?Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Polymer Posted August 27, 2019 Share Posted August 27, 2019 Patriot defense Bevin Grams Link to comment Share on other sites More sharing options...
Joe4d Posted August 28, 2019 Share Posted August 28, 2019 (edited) Looks like prices went up, its $30,,, they charge you more then issue a refund once they come back, can load a dummy round with long loaded ammo to what ever spec you want and use that as a go gauge. Be advise, not sure of that platform, but your mags may be the OAL limiting factor. https://4drentals.com/products/reamer-rentals/ Edited August 28, 2019 by Joe4d Link to comment Share on other sites More sharing options...
Localizer Posted August 28, 2019 Author Share Posted August 28, 2019 This is for a .40cal.Neither Beven nor Patriotdefense offer this service for this caliber.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
jcc7x7 Posted August 28, 2019 Share Posted August 28, 2019 Tanfo's normally have a smaller grove dia, than standard bbl's So you need to size your bbl first or go through a smith who knows tanfo's Link to comment Share on other sites More sharing options...
HesedTech Posted August 28, 2019 Share Posted August 28, 2019 Tanfoglio in 40sw normally doesn’t need the chamber reamed it’s plenty deep enough to load most bullet profiles pretty long. The problem normally is reliable feed because of bullet nose profile and the 40 mags limit the length. I have two Tanfoglios in 40, Limited and the S2, neither of which has length issues. I found they feed a more round nose profile better, Blues work great, and the 10mm mags are the answer to the mag restrictions. Link to comment Share on other sites More sharing options...
mach1soldier Posted August 28, 2019 Share Posted August 28, 2019 Message me. I can do both of them for you in .40 caliber. Link to comment Share on other sites More sharing options...
Yagi Posted August 28, 2019 Share Posted August 28, 2019 (edited) 10mm mag is a must for longer loads. Edited August 28, 2019 by Yagi Link to comment Share on other sites More sharing options...
Localizer Posted August 28, 2019 Author Share Posted August 28, 2019 2 hours ago, mach1soldier said: Message me. I can do both of them for you in .40 caliber. Many thanks Sir. Message Sent! I must be unliucky...both of mine wont plunk rounds my glock & FNP plunk...Mags are a non-issue for me. Link to comment Share on other sites More sharing options...
e-mishka Posted August 28, 2019 Share Posted August 28, 2019 I load my 40sw to 1.140 +-.002 with flat point bullets. No issues in two of my Limited models Link to comment Share on other sites More sharing options...
tdp88 Posted August 29, 2019 Share Posted August 29, 2019 Call Patriot Defense and see if they can do the 40. They did both of of my 9mm chambers and they turned out great. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now