Mk7 EVO Pro brass processing setup

[andrewtac]

Loading 40 on my Evo pro. Current sensors bullet and powder.  I have just about all my empties loaded.  I ordered a new tool head, and the offload funnel.  My plan is to put a Lee u die with decap and swage hold down die in the new tool head, swap out tool heads and process my brass.  I was thinking about a swagesense, would that stop the press if the decap doesn't work?  Or do I need a decap sensor as well?  I'll never run brass to be loaded that needs decapping (will always process first).  I saw somewhere with the swage sense and something doesn't decap you have to empty to powder station (won't be a factor in my case, as decap will not be done when there is powder on the press).

[tanks]

If you have swage sense then you will get a "ringer" alarm if there still is a primer in the case.

[OptimiStick]

Yeah. I don't really use decap sense. Just never really needed it. Sometimes I get brass that's been processed/deprimed and I mix it in with my normal OF brass. Swage sense has been enough to catch any of the offenders