zzt Posted July 10, 2019 Share Posted July 10, 2019 So far the only one I've found that isn't trashed in reviews is the Votex Optics set. Anyone have any recommendations other than Wheeler? Link to comment Share on other sites More sharing options...
Sandbagger123 Posted July 10, 2019 Share Posted July 10, 2019 this one should be a good one . i have a monntz one just like it and its awesome https://www.ebay.com/itm/Tohnichi-50RTD-Torque-Screwdriver-10-40-lbf-in-1-4-Drives-TESTED/202610145970?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D57921%26meid%3Dfaaa927d5f7c43ffae7b84fbe382ba94%26pid%3D100005%26rk%3D3%26rkt%3D12%26sd%3D264363643884%26itm%3D202610145970&_trksid=p2047675.c100005.m1851 Link to comment Share on other sites More sharing options...
Powder Finger Posted July 10, 2019 Share Posted July 10, 2019 CDI also has/had a nice inch pound driver for rings n such CDI Torque 401SM Micro Adjustable Torque Screwdriver, Torque Range 5 to 40-Inch Pounds Link to comment Share on other sites More sharing options...
Ssanders224 Posted July 10, 2019 Share Posted July 10, 2019 I use a Sturtevant Richmont Cal36/4. Amazing torque screwdriver, but pricey. Link to comment Share on other sites More sharing options...
Beef15 Posted July 10, 2019 Share Posted July 10, 2019 I have this Mac, it is probably the most quality feeling handtool I have ever used. https://www.mactools.com/en-us/Torque-Wrenches/Torque-Screwdriver/1a8cda1f-dbeb-4bc3-9f32-a2fc009cc118/Torque-Screwdriver/TSM16-88/1-4-Hex-Torque-Screwdriver-16-88-In-Lbs- Link to comment Share on other sites More sharing options...
ltdmstr Posted July 10, 2019 Share Posted July 10, 2019 Fix-It-Sticks. Link to comment Share on other sites More sharing options...
Ming the Merciless Posted July 11, 2019 Share Posted July 11, 2019 CDI and Tohnichi are good brands. We buy a lot of tools from ProTorque Tools, they have good prices and very good service. https://www.protorquetools.com/torque-screwdrivers/adjustable/?_bc_fsnf=1&sort=priceasc Link to comment Share on other sites More sharing options...
ClayBuster Posted July 12, 2019 Share Posted July 12, 2019 My brother and I bought the Vortex set, brought them to work and tested them on our torque transducer and they were both dead on, that was a couple years ago. I tested mine again 2-3 months ago and it was still good to go, for the price they're tough to beat. Link to comment Share on other sites More sharing options...
m700 Posted July 12, 2019 Share Posted July 12, 2019 Wera tools https://products.wera.de/en/torque_tools_series_7400_kraftform_torque_screwdrivers_variable_torque_adjustment_models_7400_inch.html Link to comment Share on other sites More sharing options...
zzt Posted July 12, 2019 Author Share Posted July 12, 2019 Thanks all. There are several among the suggested I'd buy. I'll start looking for deals Link to comment Share on other sites More sharing options...
bigboy69 Posted August 12, 2019 Share Posted August 12, 2019 EGW has one on their site. Link to comment Share on other sites More sharing options...
683beretta Posted August 14, 2019 Share Posted August 14, 2019 My first question would be about calibration and repair. Sooner or later you are going to need service. I would stay away from the lesser known brands. CDI is owned by Snap-on. that's the route I chose. Any dealer can send one off and get it back shortly. Link to comment Share on other sites More sharing options...
JWil Posted August 14, 2019 Share Posted August 14, 2019 On 7/10/2019 at 9:18 AM, Powder Finger said: CDI also has/had a nice inch pound driver for rings n such CDI Torque 401SM Micro Adjustable Torque Screwdriver, Torque Range 5 to 40-Inch Pounds Another vote for this CDI 401SM. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now