Jump to content
Brian Enos's Forums... Maku mozo!

Recommended Posts

Was looking for any videos of this install on mark 4 22/45 lite. Few on regular mark 4.i got lots experience with 2011 platforms but I’m noob to mark  Series of guns. Thanks for any help

Share this post


Link to post
Share on other sites

I had trouble finding video as well. Here are some takeways I learned from the few videos that helped me.

 

Use a rubber band to hold the trigger bar/disconnector up and out of the way until you are ready to drop it into place. 

 

Use the safety plate to capture the sear in the forward position. While holding this in place insert the safety/pin to capture the plate and therefore the sear. Now you can remove the rubber band and position the trigger bar/disconnector correctly on the hammer and place the hammer in the frame. The hammer will be almost sticking straight up in order for the pin holes to line up. I went ahead and place the pin in the frame so when the hammer was in correct position I could simply push the pin through. Make sure the hammer strut doesn't fall out of the mainspring cap indentation, similar to a 1911, but there is a big gap the strut can fall into on the 22/45. After the hammer is installed you should be able to push the hammer back and  it should "cock" and engage on the sear. Don't forget to put the allen retaining screw back in the safety pin on the right side of the gun.

 

Best of luck!

 

 

Share this post


Link to post
Share on other sites

Thanks guys. Are the inside of the ruger mark 4 22/45 an the 22/45 lite the same?

Share this post


Link to post
Share on other sites
Posted (edited)

Try this. One of the best videos I've seen. While not for a 22/45 it should be similar. Kit made a huge difference.

 

Edited by BigGabe

Share this post


Link to post
Share on other sites

8oLA5Vl.jpgThanks guys can’t wait to run her tonight 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...