Jump to content
Brian Enos's Forums... Maku mozo!
Localizer

Converting Tanfoglio/EAA Witness Match to DA/SA

Recommended Posts

I picked up Witness Match in .40S&W the other day, and was wondering if these can easily be converted to DA/SA.

 

Is it as simple as adding a disco to the hammer?

 

It’s just that my other Tanfos are DA/SA and I want to the same manual of arms.

 

This model also has a rail, and doesn’t quite fit into my Stock I/III holster.

 

Any recommendations on where I can find both OWB & IWB holster for it?5a5125f8f77142adc924f2b246c3f736.jpg1df00f0078dfb585a7defd4617274a88.jpg

 

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Probaby not. I have a Limited SA and its hammer does not have a notch to connect a disconnector.

From what I can tell you need a hammer, a disconnector, a disconnector pin (to hammer) and a DA/SA trigger.

Best regards,

Aleš

Share this post


Link to post
Share on other sites
Posted (edited)

Check hammer for disconnect slot and hole, if it has one get the part and roll pin, it’s really that easy. But the timing of the DA may need to set and the lower has to have the ramp for it to ride in. 

 

http://eaacorp.com/index.php?option=com_djcatalog2&format=raw&task=download&fid=164&Itemid=1227

 

The BOSS holster will adjust to fit that model.

 

I also believe the RHT S3 holster model will fit it, but not the S2. The difference is the rail mount on the dust cover. 

 

Yes I have the small frame model which came with the DA trigger. 

Edited by HesedTech

Share this post


Link to post
Share on other sites

Many thanks for the info gents.

I have a DA/SA hammer + disconnect assembly...I guess I know what I’m doing this weekend.


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
2 minutes ago, Localizer said:

Many thanks for the info gents.

I have a DA/SA hammer + disconnect assembly...I guess I know what I’m doing this weekend.


Sent from my iPhone using Tapatalk

 

I was going to offer the stock hammer & disconnector from my Stock II, but looks like you have that covered.

 

If you're successful with the conversion, I'd be interested in the SA trigger if you want to sell it. 

Share this post


Link to post
Share on other sites
4 hours ago, Localizer said:

Many thanks for the info gents.

I have a DA/SA hammer + disconnect assembly...I guess I know what I’m doing this weekend.


Sent from my iPhone using Tapatalk

You need the da trigger too. (But you probably knew that)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...