Jump to content
Brian Enos's Forums... Maku mozo!
Sign in to follow this  
tcazes

P-01 Load data

Recommended Posts

digging around my old load data and i have some for my old SP-01 running 4.1gr n320 at 1.13ish oal and 124gr if i recall making 130 or so pf. does anyone have any data for the p01? i grabbed a 99041 and need some data for the heavy little compact. i was thinking of starting at 4 gr and working up from there. i had some 5.3wac under a 124 pd jhp and they were pretty hot but accurate as all get out. i plan to chrono them too but want to have a good starting point for 320 too since i have 16lbs of it and am out of wac lol.

Share this post


Link to post
Share on other sites

4.3gr N320 FMJs seated to 1.13” gets me to 136PF on my SP-01, and runs pretty well on my P-01 but I don’t have Chrono data for the P-01.

Share this post


Link to post
Share on other sites

ill make up 3.8 (which im 90% sure will be too soft), 4.1, 4.3 and test then report back.

Share this post


Link to post
Share on other sites

Your 4.1gr load of N320 will be about 128PF - 129PF in your P-01.

Share this post


Link to post
Share on other sites

Myy match loads, which are about 132 PF in my SP-01, are just under 125 PF out of my P-01. I wouldn't bother starting at a lower weight than your existing 130 PF load for your SP-01. You're shortening the barrel over 1.5", it's not going to go faster. I'd go with 4.1-4.4 and would expected 4.3 to be in the low 130s. 

Share this post


Link to post
Share on other sites

Sweet then I'll do 4.1, 4.3 see where that stands and adjust from there

Share this post


Link to post
Share on other sites

i couldnt edit my original post but here is a few different loads i tested. so far 135 is my happy place lol 

 

 

Screenshot (2).png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...