P-01 Load data

[tcazes]

digging around my old load data and i have some for my old SP-01 running 4.1gr n320 at 1.13ish oal and 124gr if i recall making 130 or so pf. does anyone have any data for the p01? i grabbed a 99041 and need some data for the heavy little compact. i was thinking of starting at 4 gr and working up from there. i had some 5.3wac under a 124 pd jhp and they were pretty hot but accurate as all get out. i plan to chrono them too but want to have a good starting point for 320 too since i have 16lbs of it and am out of wac lol.

[SouperMan]

4.3gr N320 FMJs seated to 1.13” gets me to 136PF on my SP-01, and runs pretty well on my P-01 but I don’t have Chrono data for the P-01.

[tcazes]

ill make up 3.8 (which im 90% sure will be too soft), 4.1, 4.3 and test then report back.

[CZ85Combat]

Your 4.1gr load of N320 will be about 128PF - 129PF in your P-01.

[regor]

Myy match loads, which are about 132 PF in my SP-01, are just under 125 PF out of my P-01. I wouldn't bother starting at a lower weight than your existing 130 PF load for your SP-01. You're shortening the barrel over 1.5", it's not going to go faster. I'd go with 4.1-4.4 and would expected 4.3 to be in the low 130s. 

[tcazes]

Sweet then I'll do 4.1, 4.3 see where that stands and adjust from there

[tcazes]

i couldnt edit my original post but here is a few different loads i tested. so far 135 is my happy place lol