cjmill87 Posted June 17, 2019 Share Posted June 17, 2019 I purchased some 9mm processed brass from Everglades Ammo (sized, decapped, swaged, cleaned) and was wondering if there is any benefit to lubricating the cases for loading without sizing? My loading process will consist of Lyman M die, MBF funnel at powder station, MBF, Redding Seating Die, Lee FCD. Link to comment Share on other sites More sharing options...
zzt Posted June 17, 2019 Share Posted June 17, 2019 If the brass sticks on the MBF funnel, run them for 30-40 minutes in corn media with a dab of Dillon Case Polish mixed in. That cures the sticking. BTW, check out Ammobrass LLC next time you need brass. Less expensive and better polish. Fully processed and push through sized. 100% pass the Shockbottle case checker. Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted June 17, 2019 Share Posted June 17, 2019 31 minutes ago, cjmill87 said: any benefit to lubricating the cases for loading without sizing? No, its' the sizing that takes the lube. I"d try loading a few without sizing, but if there's ANY problem, I'd lube and size the, just in case. Link to comment Share on other sites More sharing options...
36873687 Posted June 17, 2019 Share Posted June 17, 2019 If it’s wet tumble you will stick on powder funnel. One shot or brass juice lube. Link to comment Share on other sites More sharing options...
echotango Posted June 18, 2019 Share Posted June 18, 2019 (edited) If you are using an M die, no need for the MBF die. Actually better without. Edited June 18, 2019 by echotango Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now