igolfat8 Posted May 30, 2019 Share Posted May 30, 2019 Just got a CM and need to install threaded bbl and comp. Do y’all Loctite the comp on? Link to comment Share on other sites More sharing options...
aandabooks Posted May 30, 2019 Share Posted May 30, 2019 Guide rod holds it from rotating so I really don't see a need for loctite. Has to come off everytime you disassemble. Adding loctite will just mean more to clean. Link to comment Share on other sites More sharing options...
igolfat8 Posted May 30, 2019 Author Share Posted May 30, 2019 That’s good news. Thanks! Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 30, 2019 Share Posted May 30, 2019 No need Link to comment Share on other sites More sharing options...
igolfat8 Posted May 30, 2019 Author Share Posted May 30, 2019 Got it on with no problems. Are both barrels identical? The barrel with the front sight on it is black and the other barrel in the bag was bright SS. When I compared them side by side they sure looked identical. However I installed the comp on the bright SS barrel. Link to comment Share on other sites More sharing options...
RCFL Posted May 31, 2019 Share Posted May 31, 2019 Compare the lugs on the barrels. I had a black and a SS also. The SS I got has the newer, beefier lug and the black one has the older style. You might have the same situation. Clearly, I chose to use the new-style SS barrel. Link to comment Share on other sites More sharing options...
Max It Posted June 4, 2019 Share Posted June 4, 2019 Hi Ya, I am not familiar with the CM model however when in doubt I use nail polish; not quite as strong as blue loctite but keeps things together. cheers, Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now