lfine Posted May 18, 2019 Share Posted May 18, 2019 Just received some LOK grips for CZ TSO that don't fit by a bit. It's not the length, it's the extruded area underneath that seems misshaped by a bit. Waiting to hear back about return procedure but has this happened to anyone else? Is it easy enough to take the G10 somehow with a careful dremel or some other method or material you'd suggest? Hate to go through the hassle of waiting for an RMA now, returning, and eventually getting another pair two weeks from now if it's an easy fix. Quote Link to comment Share on other sites More sharing options...
ClayBuster Posted May 18, 2019 Share Posted May 18, 2019 The Dremel will work fine, work slow and check for fit. The dust that it will produce is very hazardous to your lungs, protect yourself or wait for the RMA. Quote Link to comment Share on other sites More sharing options...
IHAVEGAS Posted May 18, 2019 Share Posted May 18, 2019 10 minutes ago, ClayBuster said: The Dremel will work fine, work slow and check for fit. The dust that it will produce is very hazardous to your lungs, protect yourself or wait for the RMA. Agree with all of the above, but, I have used a hand file on Lok grips when a Dremel was not essential. Better for dust concerns. Lok also was happy to send me a piece of scrap material to play with. Quote Link to comment Share on other sites More sharing options...
lfine Posted May 18, 2019 Author Share Posted May 18, 2019 Thanks for the warnings about the dust. Didn’t know that. I’ll try and wait one more day for the RMA...probably... Quote Link to comment Share on other sites More sharing options...
hawaiifivebro Posted May 18, 2019 Share Posted May 18, 2019 Well s#!t... I opened up the holes for the screws on my Shadow 2 grips and didn't even think about the dust being a hazard, now I know haha. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.