srrch Posted May 12, 2019 Share Posted May 12, 2019 I shoot Tanfoglio pistols in IDPA and USPSA. Id like to see a pistol that I could compete with in the IDPA CCP (compact carry pistol) division. This division is specifically for Glock 19 sized pistols. Some of the specifications are: 4 3/8 inch barrell length limit. 38.00 weight limit with the heaviest unloaded mag. Must fit in the box measuring 7 ¾” x 5 3/8” x 1 3/8”. The gun can be single action. Cone shapes barrels are allowed. I'd prefer that it utilizes large frame magazines. But small frame mags will do. Come on Tanfoglio, make this happen. Sent from my SM-G930V using Tapatalk Link to comment Share on other sites More sharing options...
himurax13 Posted May 12, 2019 Share Posted May 12, 2019 Easy peasy. These weigh 26.5 ounces with magazine inserted. The full steel compacts should be roughly the same dimension wise and be a little heavier.Sent from my VS987 using Tapatalk Link to comment Share on other sites More sharing options...
V2plus25 Posted May 12, 2019 Share Posted May 12, 2019 Bahahaha!! Please tell me both the holster and mag pouches are also Hello Kitty! And instead of blue or black bullets they’re pink bullets. Link to comment Share on other sites More sharing options...
shabodah Posted May 13, 2019 Share Posted May 13, 2019 A polymer carry models has to be close. Could you swap the upper from a carry to a compact? Link to comment Share on other sites More sharing options...
Sc0 Posted May 13, 2019 Share Posted May 13, 2019 (edited) The older EAA Steel Compacts with the Wonderfinish fall into those requirements... (Could venture into looking at the CZ75, PCR, P01 Compacts.) Am waiting for someone to bring in a large frame compact with the square trigger guard competition frame... Edited May 13, 2019 by Sc0 Link to comment Share on other sites More sharing options...
himurax13 Posted May 13, 2019 Share Posted May 13, 2019 A polymer carry models has to be close. Could you swap the upper from a carry to a compact?As long as large goes with large and small goes with small.Sent from my VS987 using Tapatalk Link to comment Share on other sites More sharing options...
srrch Posted May 13, 2019 Author Share Posted May 13, 2019 Easy peasy. These weigh 26.5 ounces with magazine inserted. The full steel compacts should be roughly the same dimension wise and be a little heavier.Sent from my VS987 using TapatalkI thought about the all steel compact, or maybe even the pavona. However, the barrell length is 3.5 inches as opposed to the 4.1 of a glock 19 or M&P 2.0 compact. That is a big enough difference to not consider them for CCP.Sent from my SM-G930V using Tapatalk Link to comment Share on other sites More sharing options...
IHAVEGAS Posted May 13, 2019 Share Posted May 13, 2019 Had a well tuned and modified 4" XD that was a tack driver, then IDPA changed the division rules making the gun 1/8" too tall (and I got disgusted and quit paying IDPA dues). Be careful of something similar if you get something heavier or otherwise different than a Glock. Link to comment Share on other sites More sharing options...
ClintMorris Posted May 21, 2019 Share Posted May 21, 2019 On 5/12/2019 at 11:19 PM, srrch said: I thought about the all steel compact, or maybe even the pavona. However, the barrell length is 3.5 inches as opposed to the 4.1 of a glock 19 or M&P 2.0 compact. That is a big enough difference to not consider them for CCP. Sent from my SM-G930V using Tapatalk I was thinking of picking one up as well but opted for the M&P 2.0 compact. I used to shoot M&P before I switched to Tanfo so it wasn’t a hard decision to make. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now