Jump to content
Brian Enos's Forums... Maku mozo!
Sign in to follow this  
paul788

Cylinder stop problem

Recommended Posts

I have a "47 vintage 5 screw Combat Masterpiece that is badly worn and needed a new stop fitted.  I bought a Powers oversize stop and have an issue.  The new one has a recess drilled into the face where the spring plunger should ride, the old one does not.  The new stop is not touched by the plunger and does not lift up to engage the cylinder.  I'm sure Carmoney or Toolguy have seen this and have a solution.  Do I need a longer spring or plunger or is it fill the recess?  Powers is closed and I'd like to get it running this weekend.

 

Thanks

Paul Beck

Share this post


Link to post
Share on other sites

The 3 and 4 screw guns don't have a plunger, just a spring that goes in the hole. The older 5 screw (yours) has a screw in the front of the trigger guard that holds the spring and plunger that operates the cylinder stop. You need to fill up that hole to make a place for the plunger to push on. I would suggest a piece of mild steel that is a close fit to the hole, loctited in place with green #648 retaining compound, then filed to match the contours of the cyl. stop. Give the Loctite a day or 2 to cure before filing on it.

Share this post


Link to post
Share on other sites

Thank you Warren.  I'll get busy.

 

Paul

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...