TTI Plus 10 basepad issue

[RangerTrace]

I'm only getting 35 rounds in a long Glock tube with a TTi Plus 10 basepad.  I'm seem to recall having a similar issue when I tried Limited a few years ago with a ZEV G35.  I think the follower is probably catching on the end of the basepad keeping it from going to the bottom.  I can't remember what the fix is.

I did search, but I'm short on time and stopped on page 5.....

 

 

Anybody?

[Bwillis]

@RangerTrace while pressing the 36th round in smack the bottom of the basepad. Load your 40 rounds hand cycle 5 rounds out and try it again. 

[RangerTrace]

20 minutes ago, Bwillis said:

@RangerTrace while pressing the 36th round in smack the bottom of the basepad. Load your 40 rounds hand cycle 5 rounds out and try it again. 

Worked like a charm on the first try.  Thank you!!  One of the many reasons I love this place.......

[PharmDShooter]

I had the same issue. I took a file and filed the back of the follower and the back of the magazine extension to make the transition easier. 

[mxj23]

This worked great for me, thanks for the tip!

[Aircooled6racer]

Hello: Another thing to look at is make sure the base pad goes all the way on, not just enough to push the pin up. I had this on one magazine a while back. Thanks, Eric

[Silverscooby27]

I dremeled the basepad in the left corner, also had to do the usual filing of the follower too.