JDIllon Posted April 9, 2019 Share Posted April 9, 2019 (edited) I was having a lot of problems with my BF going out of adjustment because of the movement of the case feeder. So I put together a inexpensive free standing mount for the BF. Mine is a 3D BF but you could adapt this to any BF. Total cost about $17.00 and it is easy and works great. I went to Lowes and got a piece of 36" 3/4" black pipe and a black 3/4"floor flang and 2 3/4" wide U bolts. On my BF, I just cut off one side of the mount that goes over the case feeder and put the U bolts through the other half. For a MBF you adapt a piece of wood the to mount the MBF to. JD Edited April 9, 2019 by JDIllon Link to comment Share on other sites More sharing options...
Furrly Posted April 9, 2019 Share Posted April 9, 2019 47 minutes ago, JDIllon said: I was having a lot of problems with my BF going out of adjustment because of the movement of the case feeder. So I put together a inexpensive free standing mount for the BF. Mine is a 3D BF but you could adapt this to any BF. Total cost about $17.00 and it is easy and works great. I went to Lowes and got a piece of 36" 3/4" black pipe and a black 3/4"floor flang and 2 3/4" wide U bolts. On my BF, I just cut off one side of the mount that goes over the case feeder and put the U bolts through the other half. For a MBF you adapt a piece of wood the to mount the MBF to. JD can you take a pix on how the BF is mounted to the cut out area .. thanks Link to comment Share on other sites More sharing options...
JDIllon Posted April 9, 2019 Author Share Posted April 9, 2019 (edited) The second picture is the back of the mount that I cut off, the U bolts go through it. Not sure what you mean? I will PM you my # if you want to call me. JD Edited April 9, 2019 by JDIllon Link to comment Share on other sites More sharing options...
Furrly Posted April 9, 2019 Share Posted April 9, 2019 43 minutes ago, JDIllon said: The second picture is the back of the mount that I cut off, the U bolts go through it. Not sure what you mean? I will PM you my # if you want to call me. JD perfect, just what I needed to see..what 3D printed BF do you have Link to comment Share on other sites More sharing options...
JDIllon Posted April 9, 2019 Author Share Posted April 9, 2019 A guy out of Atlanta Mikesreloading. Link to comment Share on other sites More sharing options...
tmz Posted April 14, 2019 Share Posted April 14, 2019 Very nice ! MB himself also makes a standalone that hooks to 3/4 pipe Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now