Jeff O Posted February 4, 2020 Share Posted February 4, 2020 At the end of the day this gun looks like it was ready to be shipped and they said "Oh s#!t, forgot the rear sight!" Pug ugly. Link to comment Share on other sites More sharing options...
touji Posted February 11, 2020 Share Posted February 11, 2020 Ended up purchasing one from LTT with a trigger job. Does anyone know if the M92a1 holsters work fine for the performance? Link to comment Share on other sites More sharing options...
Stony Lane Posted February 12, 2020 Author Share Posted February 12, 2020 The extended slide release (thumb rest, "*thumb rest [generic]*") will cause problems with most holsters. (the 92X won't fit far enough into my Red Hill Tactical made for a Wilson Brig - Brig slide and rail) I bought the competition thunder holster from Beretta USA. It is made of thin material (not ideal), but it works. (92X shown in picture) https://www.berettausa.com/en-us/x-thunder-holster-92-rh-black/e02636/ Hopefully, other holster manufacturers will step in as the guns arrive in greater numbers. Link to comment Share on other sites More sharing options...
C-Money Posted February 12, 2020 Share Posted February 12, 2020 I use a Blade Tec 92 holster and it works fine. No interference. Was made for the 92G. There will be Lok grips coming "soon." I for one will definitely be trying them as stippling the nylon grips isn't enough texture nor are they thick enough. Link to comment Share on other sites More sharing options...
touji Posted February 13, 2020 Share Posted February 13, 2020 (edited) Looks like there aren't any Blade Techs for sale for the Berettas anymore. Might have to go with the holsters on Beretta's website. Edited February 13, 2020 by touji Link to comment Share on other sites More sharing options...
porkster Posted February 13, 2020 Share Posted February 13, 2020 Called RHT and they said they just added the 92xP to the list. No other kydex places that I emailed seem to offer it. My pick would be Garrett for the leather lined Kydex but they said they can't do it. Apparently the one on Beretta's site is not good. Link to comment Share on other sites More sharing options...
C-Money Posted February 13, 2020 Share Posted February 13, 2020 The 92X Perf is NOT on the USPSA Production list. I found out at FL Open. Apparently Beretta hasn't bothered to tell USPSA about it or if they have made enough. Troy doesn't know who to contact at Beretta and neither do I. Link to comment Share on other sites More sharing options...
touji Posted February 13, 2020 Share Posted February 13, 2020 Good thing I've been looking into getting into L10 minor Link to comment Share on other sites More sharing options...
Steppenwolf Posted February 13, 2020 Share Posted February 13, 2020 (edited) I also confirmed with RHT that the 92X Performance version is available to order (note that the "non-Performance" version 92X does not have the Brigadier slide). Edited February 13, 2020 by Steppenwolf Link to comment Share on other sites More sharing options...
touji Posted February 24, 2020 Share Posted February 24, 2020 So I'm running into a problem now that I have some time to shoot the Beretta a little bit. After trying to field strip the gun, the slide does not come off of the frame. This is the first time attempting since I received it from Langdon. Any ideas as to why the slide will not come off of the frame of the gun? Link to comment Share on other sites More sharing options...
gnappi Posted February 26, 2020 Share Posted February 26, 2020 The 92 X'perf could have been much better, but they did not ask me to try it out before announcement so it came as is. New owners have rose colored glasses that even in a brisk discussion fail to admit exist... Did you ever meet an unhappy Beamer or Benz owner after many trips to the service center? Nope. Touji, I wrote Beretta about this and they said: (paraphrased) We spoke about this with the engineers and they said it only shows up on a few pistols and the engineers believe it will break in. When a closed fist sometimes did not work, I had to smack my slide off with a rubber mallet. Link to comment Share on other sites More sharing options...
C-Money Posted February 26, 2020 Share Posted February 26, 2020 1 hour ago, gnappi said: The 92 X'perf could have been much better, but they did not ask me to try it out before announcement so it came as is. New owners have rose colored glasses that even in a brisk discussion fail to admit exist... Did you ever meet an unhappy Beamer or Benz owner after many trips to the service center? Nope. Touji, I wrote Beretta about this and they said: (paraphrased) We spoke about this with the engineers and they said it only shows up on a few pistols and the engineers believe it will break in. When a closed fist sometimes did not work, I had to smack my slide off with a rubber mallet. Serious question: How did you get to talk to someone at Beretta who knew anything? I nded to get someone there to fill out the form to get the 92X perf on the Production list. Anyone who has advice on this matter is welcome to reply or PM me. Link to comment Share on other sites More sharing options...
gnappi Posted February 26, 2020 Share Posted February 26, 2020 I sent them an Email, I never got anyone on the phone And you're right I get the sense that they have a bunch of tyros there who are winging it. Link to comment Share on other sites More sharing options...
touji Posted February 26, 2020 Share Posted February 26, 2020 11 hours ago, gnappi said: The 92 X'perf could have been much better, but they did not ask me to try it out before announcement so it came as is. New owners have rose colored glasses that even in a brisk discussion fail to admit exist... Did you ever meet an unhappy Beamer or Benz owner after many trips to the service center? Nope. Touji, I wrote Beretta about this and they said: (paraphrased) We spoke about this with the engineers and they said it only shows up on a few pistols and the engineers believe it will break in. When a closed fist sometimes did not work, I had to smack my slide off with a rubber mallet. So if I'm reading this right, Beretta is saying that this is normal and that the slide will come off the frame AFTER it breaks in? So they expect us to spent a ton of rounds breaking it in before we can change out recoil springs? HAHA Link to comment Share on other sites More sharing options...
gnappi Posted February 26, 2020 Share Posted February 26, 2020 (edited) Yes, I was REALLY pissed at their flippant reply. It's not a $4k gun, but it's not a $600 Tanfoglio either. PS, try the rubber mallet Edited February 26, 2020 by gnappi Link to comment Share on other sites More sharing options...
gnappi Posted February 26, 2020 Share Posted February 26, 2020 Overall the X'perf was a disappointment. I like shooting it, but being the owner of several other Beretta models, aside from the frame safety it doesn't do much of anything my other Berettas or Taurus clones do not do as well. I also have other all steel 9's that perform equally well (without the nits I have with the X'perf) most notably my Tanfo Match, and Sig P226ST. To a died in the wool Beretta lover that's hard to swallow but my expectations of the X'perf were high and for the most part not met. Link to comment Share on other sites More sharing options...
C-Money Posted February 26, 2020 Share Posted February 26, 2020 50 minutes ago, gnappi said: Overall the X'perf was a disappointment. I like shooting it, but being the owner of several other Beretta models, aside from the frame safety it doesn't do much of anything my other Berettas or Taurus clones do not do as well. I also have other all steel 9's that perform equally well (without the nits I have with the X'perf) most notably my Tanfo Match, and Sig P226ST. To a died in the wool Beretta lover that's hard to swallow but my expectations of the X'perf were high and for the most part not met. I'm sorry you dont like the XPerf. It sounds to me like you wanted something that wasn't a gun. I mean, yeah a Taurus clone is the same thing in that it fires 9mm, has a trigger, is made of steel, etc. Elizabeth Warren is a woman and so is Ana de Armas so both should be just as good in every way, right? I get it. The 92X Perf isn't for everyone. My Tanfos, 1911s, Sigs, etc. are all good in their own ways. I honestly don't shoot the Xperf as well as guns I've shot for years. Yet, I love it just the same. It looks pimp, it points so well, the trigger is a joy, and the finish is incredible - so easy to clean. The gun is made extremely well with many aspects geared to high round count. The finish and chromed barrel in particular. I think your kvetching over the disassembly is probably unwarranted. Mine has a bit of tightness to get the slide off and sometimes feels stuck, but I use my hands and take the gun apart. No damage is evident. I want this gun to be a success because I want Beretta to make more guns like this. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted February 26, 2020 Share Posted February 26, 2020 On 2/13/2020 at 11:00 AM, Twinkie said: I found out at FL Open. Apparently Beretta hasn't bothered to tell USPSA about it or if they have made enough. Troy doesn't know who to contact at Beretta and neither do I. Did you wind up in Limited 10 or in Open? Link to comment Share on other sites More sharing options...
C-Money Posted February 26, 2020 Share Posted February 26, 2020 3 minutes ago, MemphisMechanic said: Did you wind up in Limited 10 or in Open? RM let me go to Limited 10. Which was nice but I would have been OK with Open. I didn't go to win but to have fun. Which it was. One of the best matches every year. Link to comment Share on other sites More sharing options...
touji Posted February 26, 2020 Share Posted February 26, 2020 8 minutes ago, Twinkie said: I think your kvetching over the disassembly is probably unwarranted. Mine has a bit of tightness to get the slide off and sometimes feels stuck, but I use my hands and take the gun apart. No damage is evident. I want this gun to be a success because I want Beretta to make more guns like this. My main issue is that I can't get the slide off of the frame at all. It isn't that it feels stuck, but it is actually stuck. I've tried using a plastic punch and a small punch hammer with no luck. I'm going to have to find a mallet and possibly sacrifice my rear sight to get the slide off so I can change recoil springs. Link to comment Share on other sites More sharing options...
C-Money Posted February 26, 2020 Share Posted February 26, 2020 4 minutes ago, touji said: My main issue is that I can't get the slide off of the frame at all. It isn't that it feels stuck, but it is actually stuck. I've tried using a plastic punch and a small punch hammer with no luck. I'm going to have to find a mallet and possibly sacrifice my rear sight to get the slide off so I can change recoil springs. Beretta absolutely won't warranty it? How about talking to Langdon? I spoke to them about my Elite LTT and they helped me figure out the cause of a malfunction. Stupid question: Did you try pushing it the other way i.e. backwards? I had to do that once on my Xperf. Well, maybe not had to but it solved my slide binding issue enough to take the slide off. Link to comment Share on other sites More sharing options...
touji Posted February 26, 2020 Share Posted February 26, 2020 Unsure about Beretta but I've been talking to Langdon pretty frequently. At the moment, they've told me that they've never seen the slide bind issue before for the 92x performance and they're confused since they had to take the gun apart to do the trigger work. The only time they've seen disassembly issues, it was barrel related. I was told to lube the locking block and let it penetrate for a few days and try again. If it doesn't work, I'll be sending it to LTT before I engage Beretta. Although, hearing that Beretta is aware of the issue and is saying it's a break-in issue, not sure if it's even worth sending it back and just hammering the slide off myself. When you say you had to push it backwards, are you talking about the takedown lever? Link to comment Share on other sites More sharing options...
gnappi Posted February 26, 2020 Share Posted February 26, 2020 1 hour ago, Twinkie said: I'm sorry you dont like the XPerf. It sounds to me like you wanted something that wasn't a gun. I mean, yeah a Taurus clone is the same thing in that it fires 9mm, has a trigger, is made of steel, etc. Elizabeth Warren is a woman and so is Ana de Armas so both should be just as good in every way, right? I get it. The 92X Perf isn't for everyone. My Tanfos, 1911s, Sigs, etc. are all good in their own ways. I honestly don't shoot the Xperf as well as guns I've shot for years. Yet, I love it just the same. It looks pimp, it points so well, the trigger is a joy, and the finish is incredible - so easy to clean. The gun is made extremely well with many aspects geared to high round count. The finish and chromed barrel in particular. I think your kvetching over the disassembly is probably unwarranted. Mine has a bit of tightness to get the slide off and sometimes feels stuck, but I use my hands and take the gun apart. No damage is evident. I want this gun to be a success because I want Beretta to make more guns like this. You never saw me saying I don't like it, just that it could be better and I did not like their attitude about the slide frame fitment. And actually I'm "kvetching" about a WHOLE LOT more than slide disassembly. Beretta made other boo-boos that I overlook but it's not particularly user friendly. Reaching the Slide stop with the right hand is much like a Tanfo, I can say that's my only beef with the Witness. I use my left thumb. But the hammer buried in the (very high mounted) rear sight in a DA gun? Really? That's bad design, as is the sharp edges on the rail which bite me when I rack the slide from under the dust cover. The take down lever feels like it has sand in it, a trigger with serrations? Why do that? The frame stippling and slide serrations are very rough cut, the worst I've seen and uncomfortable. Scratch that, the rear frame cuts force me to stop shooting it after a box and a half or so of ammo. Lastly IF they were going after Tanfo delivering it with two 15 round mags with plastic pads when they have 17's and rubber pads in stock? In general I'm a Beretta fan boy there are several in my safe with 92's and 96's among them. If your XP doesn't exhibit / have these ergo issues I can only assume yours was better made than mine, you're less prone to be critical or mine was a rush job Monday build. Given that CNC doesn't have a hangover from Sunday, I doubt mine is unique. Link to comment Share on other sites More sharing options...
Jeff O Posted February 26, 2020 Share Posted February 26, 2020 No more interest. Link to comment Share on other sites More sharing options...
C-Money Posted February 26, 2020 Share Posted February 26, 2020 2 hours ago, touji said: Unsure about Beretta but I've been talking to Langdon pretty frequently. At the moment, they've told me that they've never seen the slide bind issue before for the 92x performance and they're confused since they had to take the gun apart to do the trigger work. The only time they've seen disassembly issues, it was barrel related. I was told to lube the locking block and let it penetrate for a few days and try again. If it doesn't work, I'll be sending it to LTT before I engage Beretta. Although, hearing that Beretta is aware of the issue and is saying it's a break-in issue, not sure if it's even worth sending it back and just hammering the slide off myself. When you say you had to push it backwards, are you talking about the takedown lever? No I think I had to bring it back to get the locking block pin (which impacts the frame and unlocks the barrel) back into alignment with the locking block. The block can wander a bit left to right and if it does so it wont pivot. What Langdon says about living the block makes sense in that context. I'd do whatever Langdon told me to. If they say send it in to them or Beretta you probably should. If you have a competent, experienced gunsmith locally they may also be able to look at it and figure out how to get it apart. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now