Jump to content
Brian Enos's Forums... Maku mozo!

CZ 75 170mm base pad options?


regor
 Share

Recommended Posts

Are there any base pad options around to extend the  CZ75/SP-01/Shadow factory 18 round or Mec-Gar 17 round mags to 170mm?

 

I scooped up a P-01 that I plan to appendix carry and want to shoot it in the occasional club match just for fun and practice. I'm planning on shooting it in Open to keep the Classifier scores in their own bucket, and I think it would be really funny to run it with a 170mm mag, but I haven't been able to find anything from the usual suspects. Plenty of options for 140mm plates, one which would probably be around 150mm on the factor 18 rounders, but I'm hoping someone makes 170s. I've seen enough SP-01 based Open CZs that there must be something, right?

Link to comment
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

4 hours ago, Fo0 said:

If you want to be really funny spend $141 on an EAA Tanfoglio small frame 170mm magazine

 

https://9mmstore.eu/index.php?route=product/product&product_id=327

 

 

 

Just because I said I'll running it in Open doesn't meant I want to spend open money! 😬

 

If there's nothing stock then I'll probably just stick with 140s. Maybe stick the extensions for the 17 rounders on to the 18 rounders.

Link to comment
Share on other sites

22 minutes ago, kneelingatlas said:

 

CZC pads and guts get 25+1 on 18 round tubes

 

Would that hold true for any combo of 140mm extensions + grams/CZC guts, or do CZCs offer the most room? 

Link to comment
Share on other sites

13 hours ago, regor said:

 

Would that hold true for any combo of 140mm extensions + grams/CZC guts, or do CZCs offer the most room? 

 

The CZC long pads are designed to be used on CZ 16 round tubes and make them 140mm, CZC short pads are meant to extend the 18 round tubes to 140mm, and I believe other shops make a 140mm pad for the Mecgar 17 round tubes.  The CZC long will be the longest of these.

Edited by kneelingatlas
Link to comment
Share on other sites

  • 2 weeks later...
On 3/3/2019 at 12:29 PM, kneelingatlas said:

How many people here would be interested in a run of 170mm pads for CZ 18 round tubes? and how many would you commit to buy?

 

Any movement on this or was interest too low? 

Link to comment
Share on other sites

34 minutes ago, kneelingatlas said:

 

I got some interest on Facebook, reached out to one of the manufacturers and got a promising response, but nothing solid yet.

 

Awesome, hopefully it works out. 

 

 

Link to comment
Share on other sites

8 hours ago, kneelingatlas said:

 

I got some interest on Facebook, reached out to one of the manufacturers and got a promising response, but nothing solid yet.

I'm in for a couple.

I tried to talk taylor freelance into making some last year and they seemed interested but no luck yet. 

Link to comment
Share on other sites

On 3/1/2019 at 7:29 PM, regor said:

Are there any base pad options around to extend the  CZ75/SP-01/Shadow factory 18 round or Mec-Gar 17 round mags to 170mm?

 

I scooped up a P-01 that I plan to appendix carry and want to shoot it in the occasional club match just for fun and practice. I'm planning on shooting it in Open to keep the Classifier scores in their own bucket, and I think it would be really funny to run it with a 170mm mag, but I haven't been able to find anything from the usual suspects. Plenty of options for 140mm plates, one which would probably be around 150mm on the factor 18 rounders, but I'm hoping someone makes 170s. I've seen enough SP-01 based Open CZs that there must be something, right?

Second option is taking 2 mags and cut and weld them together to 171mm 

Link to comment
Share on other sites

Second option is taking 2 mags and cut and weld them together to 171mm 
I know someone that did that and let me tell you it worked flawlessly!! [emoji39] I think he should start marketing them.... just saying lol.

Sent from my SM-G960U using Tapatalk

Link to comment
Share on other sites

9 hours ago, JayTac556 said:

I know someone that did that and let me tell you it worked flawlessly!! emoji39.png I think he should start marketing them.... just saying lol.

Sent from my SM-G960U using Tapatalk
 

HaHa. Maybe it could pay off a new Tig welder.

Edited by je85
Link to comment
Share on other sites

EAA Witness 9MM 25RD Small Frame #101921 Magazine

Armory Craft CZ75 Base Pad

Grams Spring and Follower

Holds 27 Reloadable

 

Building an open gun so haven't shot it yet but the slide cycled fine by hand with ammo.

 

DSC_01011111.thumb.JPG.0aa55e6717e3205ff8197a6e24f98664.JPG

 

658987521_DSC_0091(2)11111.thumb.JPG.9e4a3495a1d2aad71890fbb07d1be057.JPG

 

 

 

 

Link to comment
Share on other sites

6 hours ago, Fo0 said:

EAA Witness 9MM 25RD Small Frame #101921 Magazine

Armory Craft CZ75 Base Pad

Grams Spring and Follower

Holds 27 Reloadable

 

Building an open gun so haven't shot it yet but the slide cycled fine by hand with ammo.

 

DSC_01011111.thumb.JPG.0aa55e6717e3205ff8197a6e24f98664.JPG

 

658987521_DSC_0091(2)11111.thumb.JPG.9e4a3495a1d2aad71890fbb07d1be057.JPG

 

 

 

 

Awesome! 

Link to comment
Share on other sites

22 hours ago, Fo0 said:

EAA Witness 9MM 25RD Small Frame #101921 Magazine

Armory Craft CZ75 Base Pad

Grams Spring and Follower

Holds 27 Reloadable

 

Building an open gun so haven't shot it yet but the slide cycled fine by hand with ammo.

 

DSC_01011111.thumb.JPG.0aa55e6717e3205ff8197a6e24f98664.JPG

 

658987521_DSC_0091(2)11111.thumb.JPG.9e4a3495a1d2aad71890fbb07d1be057.JPG

 

 

 

 

What a deal!! Only  $141 thats hilarious plus $20 for spring and follower and another $20 for the pad. $181 LMFAO

Thats more than tuned 2011 mbx mags

I'll pass....

Edited by je85
Link to comment
Share on other sites

15 hours ago, je85 said:

What a deal!! Only  $141 thats hilarious plus $20 for spring and follower and another $20 for the pad. $181 LMFAO

Thats more than tuned 2011 mbx mags

I'll pass....

 

edit

Edited by Fo0
Link to comment
Share on other sites

15 hours ago, je85 said:

What a deal!! Only  $141 thats hilarious plus $20 for spring and follower and another $20 for the pad. $181 LMFAO

Thats more than tuned 2011 mbx mags

I'll pass....

 

2011 magazines don't work in this CZ

Link to comment
Share on other sites

8 hours ago, Fo0 said:

 

2011 magazines don't work in this CZ

They will fit with a big hammer. LOL

The irony is buying $180 mags to go in a $500 gun

We still need a 171mm extension for standard mags.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share


×
×
  • Create New...