ezra650 Posted February 27, 2019 Share Posted February 27, 2019 (edited) Just wanted to share the DIY strong mount I came up with for my rock chucker. Used a boat seat pedestal made by Attwood, purchased at Walmart for $10~ I did have to put a piece of wood between the press and pedestal to elevate the press high enough so the link assembly would clear the bench. I clamped the wood to the pedestal using C clamps and drilled the mounting holes through the wood and pedestal at the same time. This helped keep the drill bit from walking. This method possibly could work for a dillon press too if you got the 13" high pedestal and the mounting surface was wide enough. I used the 7" pedestal. For $20 it's a great way to get the press on and off the bench quickly when working with limited space. Edited February 27, 2019 by ezra650 title change for more accurate search Quote Link to comment Share on other sites More sharing options...
Steve RA Posted February 27, 2019 Share Posted February 27, 2019 Great idea, looks like it would be really handy ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.