Glock17open Posted February 19, 2019 Share Posted February 19, 2019 I have a small problem, my open gun that has a cmore slide ride mounting. Once every so often an empty case does not full eject and get caught between the mount and ejection port. What causes this and how do I fix It. It doesn't happen often and is easy to clean. I just want to fix it Quote Link to comment Share on other sites More sharing options...
Glock17open Posted February 19, 2019 Author Share Posted February 19, 2019 It's a 2011 open gun Quote Link to comment Share on other sites More sharing options...
Keola5o4 Posted February 19, 2019 Share Posted February 19, 2019 Been through the same issue. One of the simplest thing you can do is check what brand case did the malfunction so sorting brass can be a start, 2nd tune the ejection. And If all else fails change the mount all together to a offset or a 45 mount. Quote Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted February 19, 2019 Share Posted February 19, 2019 I used to have that same problem with my TruBor - took me months to realize it happened only with one of my four magazines. I fixed the mag, and the problem went away. Not saying that your mag is definitely causing the problem, there are other possibilities - but the easiest to identify is to see if the problem occurs with just one of your mags. Quote Link to comment Share on other sites More sharing options...
Glock17open Posted February 19, 2019 Author Share Posted February 19, 2019 31 minutes ago, Hi-Power Jack said: I used to have that same problem with my TruBor - took me months to realize it happened only with one of my four magazines. I fixed the mag, and the problem went away. Not saying that your mag is definitely causing the problem, there are other possibilities - but the easiest to identify is to see if the problem occurs with just one of your mags. What was the mag problem Quote Link to comment Share on other sites More sharing options...
Jfitz427 Posted February 19, 2019 Share Posted February 19, 2019 (edited) Mine used to do that once in a while, not often, Maybe once ever 150rds or so. So I ditched the slide ride and went to to a micro dot and mount (Romeo 1 6 moa) and now it’s 100% reliable. The Romeo is as bright, if not brighter then the c more. Windows a bit smaller, but it’s big enough. I did love the huge window on the cmore. But I like reliability better. Not that my gun was unreliable, because it wasn’t, I think it ran about as good as it can with that setup. I just figured it would be much easier and I’d have less problems long term with the small dot and mount. So far I’ve ran 800rds though the gun and the only malfunctions I’ve had was due to my sti mags causing a few nose dives. Mbx ran 100%, sti about 95%. No FTE or anything gun related. Edited February 19, 2019 by Jfitz427 Quote Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted February 19, 2019 Share Posted February 19, 2019 24 minutes ago, Glock17open said: What was the mag problem Needed new spring Quote Link to comment Share on other sites More sharing options...
Furrly Posted February 19, 2019 Share Posted February 19, 2019 Adjust ejector, or change optic mount.. Those mounts take up a lot of real estate on top of the gun.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.