revoman Posted February 18, 2019 Share Posted February 18, 2019 Asking for a friend. What other extractor will fit and work on a 8 shot 38 Super? Quote Link to comment Share on other sites More sharing options...
Toolguy Posted February 18, 2019 Share Posted February 18, 2019 The 38/357 extractor should work. Might need to run a 38 super chamber reamer in there, but maybe not. Quote Link to comment Share on other sites More sharing options...
missed it by that much Posted February 19, 2019 Share Posted February 19, 2019 Probably not the right guy to answer, but what it's worth. I have an 8 shot 38 super original from s&w and my 929 uses the same moon clips. Maybe someone with more knowledge might be able to chime in. I'm not sure if that makes the extractors compatible. Sent from my SM-G960U using Tapatalk Quote Link to comment Share on other sites More sharing options...
revoman Posted February 19, 2019 Author Share Posted February 19, 2019 Thanks for the replies I will pass that on. Quote Link to comment Share on other sites More sharing options...
10mmdave Posted February 19, 2019 Share Posted February 19, 2019 I swapped out some 38/357 cylinders for super cylinders on 2 guns and the 38/357 extractors fit fine. When I started shooting 9mm brass in these 2 I did need to do a little work on the extractors to stop some sticky extraction (or maybe it was insertion??) Quote Link to comment Share on other sites More sharing options...
pskys2 Posted February 20, 2019 Share Posted February 20, 2019 Toolguy is the guy who knows, he's a regular Bianchi Competitor (pretty good also) and he's a skilled machinist who has built his share of pistols/revolvers. Quote Link to comment Share on other sites More sharing options...
revoman Posted February 20, 2019 Author Share Posted February 20, 2019 I met him one time in Kansas City a long time ago when ICORE was first getting started and I was there trying to promote ICORE. This would have been in the early or mid 90’s. Quote Link to comment Share on other sites More sharing options...
revoman Posted March 3, 2019 Author Share Posted March 3, 2019 Moderators please close as question has been answered. Thanks Quote Link to comment Share on other sites More sharing options...
Toolguy Posted March 3, 2019 Share Posted March 3, 2019 Thanks for the good review, guys! Much appreciated. Quote Link to comment Share on other sites More sharing options...
revoman Posted March 3, 2019 Author Share Posted March 3, 2019 I forgot to add that I was really impressed with Toolguy back when I met him in the early 90’s and he is the guy to ask questions about revolvers. Truly innovated. Quote Link to comment Share on other sites More sharing options...
.gif.53c483221c1b60d84bce93d42c5def5a.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.