Jump to content
Brian Enos's Forums... Maku mozo!
Rudukai13

ETS Group aftermarket P320 mags incoming

Recommended Posts

7 minutes ago, CZ173 said:

Which distributor?
I checked with a bunch of them and nothing...

Sent from my LM-V405 using Tapatalk
 

Chattanooga Shooting Supplies. They had them in their eShow. 

Share this post


Link to post
Share on other sites

Asked ETS on a question about basepad compatibility on Arfcom and got this response.

 

"Ok the short answer is that baseplates made for metal mags won’t work. To make poly mags we have to make an interface that is suitable for the material ie thicker.

So our solution was to come up with a patent pending universal interface. All of our new 9mm mags take the same base plate. But to give you guys more aftermarket options we made this new interface so it would accept baseplates that fit glock mags. So if it fits a glock oem mag it will fit all of our mags. Plus, the new design is so strong that in drop testing our 30 round .45 mag never came apart even in 10ft drops on concrete. It was quite the violent impact. Poor mags 😂

Bottom line for you, the new sig 320 mags will work with glock baseplates."

Share this post


Link to post
Share on other sites
9 hours ago, MustangMan said:

Asked ETS on a question about basepad compatibility on Arfcom and got this response.

 

"Ok the short answer is that baseplates made for metal mags won’t work. To make poly mags we have to make an interface that is suitable for the material ie thicker.

So our solution was to come up with a patent pending universal interface. All of our new 9mm mags take the same base plate. But to give you guys more aftermarket options we made this new interface so it would accept baseplates that fit glock mags. So if it fits a glock oem mag it will fit all of our mags. Plus, the new design is so strong that in drop testing our 30 round .45 mag never came apart even in 10ft drops on concrete. It was quite the violent impact. Poor mags 😂

Bottom line for you, the new sig 320 mags will work with glock baseplates."

 

Good info, thanks. Hopefully the mag bodies are sized so that there is a commonly available path to a 126, 140 or 170mm magazine; ie, they didn't make the Sig mag a few mm longer than the Glock one, making it nearly impossible to use any of the Glock aluminum pads and meet the length requirement.

Share this post


Link to post
Share on other sites
3 hours ago, thormx538 said:

 

Good info, thanks. Hopefully the mag bodies are sized so that there is a commonly available path to a 126, 140 or 170mm magazine; ie, they didn't make the Sig mag a few mm longer than the Glock one, making it nearly impossible to use any of the Glock aluminum pads and meet the length requirement.

 

I too am a bit worried about this. I plan on ordering 21rd mags and using glock +5/6 basepads and using them for practice only where the additional rounds per mag will be useful for getting more drills in without reloading mags. Another concern is using basepads on the 17rd mags with the X5 magwell. Once people do some experimenting to figure out which mag and basepad combos come to what lengths, then I'll order some to use for competition use.

 

 

Share this post


Link to post
Share on other sites

Website now says available 10/7.  Hope that's the case, want to try a 17 and 21 rounder, maybe a 30 just for fun.

Share this post


Link to post
Share on other sites

The mags just went live a little while ago and they have a 10% discount code available they sent with the e-mail announcement. I was excited about the 21rd mags but from the looks of the flat basepad we won't be able to attach any basepads to them and I'm weary of whether the glock basepads will clear an X5 magwell with the 17rd mags. The 21rd mags may still be useful for practice mags though, was hoping to add basepads to them though but that looks like it won't happen.

 

 

Share this post


Link to post
Share on other sites

I asked in the ETS industry forum on arf, and ETS said the 21rd ones just fit in the mag gauge in stock trim. So they'd probably need a very thin Glock basepad to work.

 

They said the 17 and 15rd ones work with X-Frames

 

They also said the Sig mags tend to not drop free when they are partially loaded, but do when empty.

Edited by thormx538

Share this post


Link to post
Share on other sites
15 hours ago, thormx538 said:

I asked in the ETS industry forum on arf, and ETS said the 21rd ones just fit in the mag gauge in stock trim. So they'd probably need a very thin Glock basepad to work.

 

They said the 17 and 15rd ones work with X-Frames

 

They also said the Sig mags tend to not drop free when they are partially loaded, but do when empty.

 

With that info I'm glad I waited to order. Not falling free unless empty means they aren't of much use to me for practice and definitely of no use to me in a match.

 

 

Share this post


Link to post
Share on other sites

I received the two mags I ordered today. They do not load smoothly or drop free when loaded.  I purchased these hoping to use them for practice to save wear on my factory mags but unfortunately this will put some limits on their usefulness. I’ll still be able to use them just not for reloads.

Share this post


Link to post
Share on other sites

Just got 5x of them today. Will test them tomorrow

Sent from my LM-V405 using Tapatalk

Share this post


Link to post
Share on other sites
On 10/12/2019 at 2:06 AM, MustangMan said:

 

With that info I'm glad I waited to order. Not falling free unless empty means they aren't of much use to me for practice and definitely of no use to me in a match.

 

 

 

A big +1.  Not gonna order any now, unless a bunch of people start posting better results.  Very disappointing.  

Edited by dave33

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...