Jump to content
Brian Enos's Forums... Maku mozo!
jkrispies

3D Printed PCC Magwell Designs Online?

Recommended Posts

Hi all!  

 

Before I start this thread, I need to preface it by saying that I personally have zero experience with 3D printing, but I have access to printers through friends who are willing to work with me.  In other words, please phrase your answers for a total newbie...

 

I'd like to install a magwell on my PCC, but I haven't found any designs which fit my vision of a perfect magwell.  If I could find an open-sourced or purchasable program to print for an NFA lower, I think I could take it to my buddies and modify it with them from there.  This is especially true since my idea is more on the minimalist side and will likely involve subtracting from the design more than adding to it.  Really, if I can find one with an acceptable attachment point, we could probably handle the funnel modifications if the program will allow us to modify the design.  Worst case scenario, I might be able to just go old school and sand it down after the fact.

 

So... does anybody know where I can locate an existing 3D print plan (design, program... whatever it's called in 3D printing???) for an NFA lower magwell?  

 

Thanks,

J

Edited by jkrispies

Share this post


Link to post

Hello: I will ask my son if he knows of any. That kid makes some pretty cool things with his 3D printer. Thanks, Eric

Share this post


Link to post
2 hours ago, Aircooled6racer said:

Hello: I will ask my son if he knows of any. That kid makes some pretty cool things with his 3D printer. Thanks, Eric

Cool, thanks!  

Share this post


Link to post

Hello: That is the site he has posted some of his stuff on. When he wakes up I will ask him to look. Thanks, Eric

Share this post


Link to post
16 minutes ago, ABQautoxer said:

Check places like thingverse:

 

https://www.thingiverse.com/thing:2509328

 

No experience but I was looking since I have several friends into 3D printing if I one ones I like for the FM9 and GMR15.

 

13 minutes ago, Aircooled6racer said:

Hello: That is the site he has posted some of his stuff on. When he wakes up I will ask him to look. Thanks, Eric

Thanks for the link!  I didn't see any PCC magwells, but maybe somebody else with a better search-fu can find one.

Share this post


Link to post
2 hours ago, VincePalazzolo said:

I am looking for a magwell that will work on my M&P 22. Let me know if you know someone that has one available that will fit. Vince

 

  TitanRocket.com sells one for the M&P 22 and you can get it in custom colors and text on it if you want

Share this post


Link to post
11 minutes ago, outdoorjake said:

 

  TitanRocket.com sells one for the M&P 22 and you can get it in custom colors and text on it if you want

One of these may be in my future for my PCC.  The price is right, and I can grind on it.

Share this post


Link to post

probably will have to design something from the ground up major PITA, but kinda fun depending on the way you see it.  Made one for my palmetto lower took 4 tries to get it right. 

 

 

Share this post


Link to post

FYI 3d printed stuff isnt like a solid piece of aluminum. Internally imagine it has a honey combish structure so sanding may not be the best option.  

Share this post


Link to post
16 minutes ago, andrewt556 said:

FYI 3d printed stuff isnt like a solid piece of aluminum. Internally imagine it has a honey combish structure so sanding may not be the best option.  

Ah.  Good info

Share this post


Link to post
2 hours ago, andrewt556 said:

FYI 3d printed stuff isnt like a solid piece of aluminum. Internally imagine it has a honey combish structure so sanding may not be the best option.  

Not necessarily true. You can print things solid, just takes more time and money.

Share this post


Link to post
16 hours ago, VincePalazzolo said:

I am looking for a magwell that will work on my M&P 22. Let me know if you know someone that has one available that will fit. Vince

I have a Titan Rocket on my 15-22, good bang for the buck

Share this post


Link to post

I have a 3d printer. I also have a cnc mill. I have been working on a pcc magwell off and on for a while and have yet to come up with a version I'm happy with. The downside is there are multiple pcc lowers out there so a different design for each is required. I have printed some magwells for 223/5.56 forged Ar lowers that are durable and look good too. Me and my friends have been using them on our 3gun Ar's for a couple years. 

Share this post


Link to post

I sure Wish Titan Rocket would make a magwell for a Stag 9mm carbine … 

Share this post


Link to post

I sure wish the guys from Titan Rocket would make some other versions also

 

Edited by Startingover

Share this post


Link to post

we would be happy to help anyone interested in helping  with making a magwell for what ever lower they have if at possible with our designs

Edited by outdoorjake
retraction of statment

Share this post


Link to post
37 minutes ago, outdoorjake said:

we would be happy to help anyone interested in helping  with making a magwell for what ever lower they have if at possible with our designs

Jake, I sent Brandon a return email earlier this morning.  I'll PM you with the gist of my email.

Share this post


Link to post

FWIW, here’s my real inspiration for this thread...   That chunk of meat looking thing?  That’s me.  Off my wrist.  Part of the pleasure of living the life of a lefty in a right handed world.  

B66394DE-B48F-498F-8151-048AE20C4892.jpeg

Edited by jkrispies

Share this post


Link to post

Hi all.

 

I  have been looking for a magwell for my Glock 9MM NFA lower and besides the TechWell offering that fits NFA, CK Arms and a couple of other lowers - i cant seem to find anything.

 

Trying to find an inexpensive solution and 3D printing seems to be the way to go.  I cant find any 3D designs online for my specific lower... but looks like they do exist: http://www.makereadyproshop.com/taccom-magwell-pcc-magazine-funnel/

 

Does any one have a file they could share with me?  Or a lead on where to find it? 

 

Thank you in advance!

Share this post


Link to post

Your best is  to make friends with someone that that proficient with a a few Program and modeling. Jo N thingiverse grabcad and make some friends. :)

Edited by 45plinkster

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...