Jump to content
Brian Enos's Forums... Maku mozo!
Blaster

CMMG guard in45acp

Recommended Posts

So I just got one.Looking to upgrade trigger and buffer. Anyone have one in 45 that has actually done upgrades or any advice. Thanks

 

 

Share this post


Link to post

I run one. 

 

The stock buffer that came in my 16in gun is an H buffer with a Sprinco(White) regular carbine spring.  This setup has performed really well with everything from 160gr @1050fps all the way to .45 Super 185gr @1600fps  , 255gr @1200fps handloads for bowling pin comps and Hog hunting.  

 

I did try a standard carbine 3oz buffer with the 160gr loads for a few USPSA matches with very good success, the recoil impulse was minimised. But this rifle already shoots so soft due to the radially delayed blowback .  

 

Geissele SSA trigger, has worked really well in my rifle. 

 

I run small primer Blaser or Fed brass and CCI 400 primers.  Most factory loads will gain about 100-150fps  in this 16in barrel , .45 SUPER will be quite a bit higher.  (These guns are factory rated for .450 SMC and .45 SUPER) 

 

If you want to go slow say 130pf,  I would switch to a 3oz standard carbine buffer and ** POSSIBLY** a sprinco reduced recoil spring or one of the subsonic 300blk springs. 

 

The Kriss 30rnd mag extensions have worked well  as long as you have a Glock mag body that doesn't bulge (having a few mags to try helps a ton) 

 

Techwell makes a Mag well and it is fantastic. 

 

These are really great rifles and pretty awesome that you can make a ton of power with 45 Super if you want to. 

 

I have about 4500rnds through mine of all types of bullet profiles and velocities.  Semi-wadcutters are problematic in feeding as are some wide meplat hunting bullets.  Round nose flat point and traditional fmjs work great. Truncated cone bullets work well as long as the oal is short. 

 

Mike 

 

 

 

 

 

Share this post


Link to post

Mikeone thanks for all the info. I went to Techwells website and they show only a  mag well for  CMMG 9mm, is that the one that works on yours?

Share this post


Link to post

Thread revival. I’m interested in trying a .45, just for fun. Does anyone know if you really need the Guard lower, or would a QC10 lower work for .45?  Theres one locally available for a good price, and stripped Guard lowers are hard to find and more expensive. 

Share this post


Link to post

One thing I like about my 9mm guard is the ridge that is manufactured in the lower.  The magazines are inserted at the exact needed height for proper functioning in the guard.  I would not do another guard without their lower.

Share this post


Link to post

Does anyone with one of these also have a Glock 20? Can you try a G20 mag in the lower?  With the advent of the .40 Guard I’m liking the idea of having both uppers on the large frame lower, and running my long-loaded Limited ammo from G20 magazines. I checked with CMMG though, and was told that G20 magazines won’t fit in the lower because they’re bigger than .45 magazines. Seems wrong to me but I don’t own any to check. 

Share this post


Link to post

So USPSA matchs have max 32rds per stage, any idea how to get reliable mag that holds at least 32 rds so no reload?

Share this post


Link to post
13 hours ago, Blaster said:

So USPSA matchs have max 32rds per stage, any idea how to get reliable mag that holds at least 32 rds so no reload?

 

Not that I have seen, but ETS has a 30 rounder .45 magazine on the way.  Perhaps some tweaking will get you there?

 

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...