Garmil Posted December 26, 2018 Share Posted December 26, 2018 Anyone tried one yet? Curious on how much fitting was required and any ideas on what comps would look and work well on them. Link to comment Share on other sites More sharing options...
Blockader Posted December 26, 2018 Share Posted December 26, 2018 Where are you seeing these For sale? Link to comment Share on other sites More sharing options...
Hi_Im_Vinh Posted December 26, 2018 Share Posted December 26, 2018 (edited) CZCustom makes them, I myself have been eyeing this . https://czcustom.com/czc-brl-thrd-9mm-ts.html Edited December 26, 2018 by Hi_Im_Vinh Link to comment Share on other sites More sharing options...
eerw Posted December 26, 2018 Share Posted December 26, 2018 1 hour ago, Blockader said: Where are you seeing these For sale? At czcustom.com Link to comment Share on other sites More sharing options...
Cajunguy Posted December 27, 2018 Share Posted December 27, 2018 Interesting Link to comment Share on other sites More sharing options...
Cajunguy Posted December 27, 2018 Share Posted December 27, 2018 Is there a compensator made for it? Link to comment Share on other sites More sharing options...
CookieTheSwede Posted December 27, 2018 Share Posted December 27, 2018 I hope a comp comes out. I allready have a red dot. So add a comp and a little extra powder and it would make a nice open gun. Assuming the barrel is GTG with 9 major. Can’t get that question answered. Link to comment Share on other sites More sharing options...
obsessiveshooter Posted December 27, 2018 Share Posted December 27, 2018 The "peanut" on these barrels has the profile of the older 9mm czechmate barrels that didn't handle 9 major very well. Someone please correct me if I'm wrong! Link to comment Share on other sites More sharing options...
dccarper Posted December 27, 2018 Share Posted December 27, 2018 Bummer Link to comment Share on other sites More sharing options...
obsessiveshooter Posted December 27, 2018 Share Posted December 27, 2018 Bummer Let's wait till we hear back from CZ Custom before we write these off for 9 major!Sent from my SM-N960U using Tapatalk Link to comment Share on other sites More sharing options...
yigal Posted December 27, 2018 Share Posted December 27, 2018 (edited) in this pic. it's .40 cal tso. not 9mm Edited December 27, 2018 by yigal Link to comment Share on other sites More sharing options...
CookieTheSwede Posted December 27, 2018 Share Posted December 27, 2018 They don’t make it in .40. Linky Link to comment Share on other sites More sharing options...
Cajunguy Posted December 28, 2018 Share Posted December 28, 2018 (edited) I would get it for the slightly longer barrel also. My po9 is actually more accurate with the extended barrel than the regular one. Seems that way at least. And they look cool My ts blue with the cgw barrel bushing is already a tack driver. I will get this barrel when i can though. It's one of those try to always improve the toy things I guess. Edited December 28, 2018 by Cajunguy Adding to it Link to comment Share on other sites More sharing options...
Laxman2809 Posted January 28, 2019 Share Posted January 28, 2019 (edited) On 12/27/2018 at 11:09 AM, CookieTheSwede said: They don’t make it in .40. Linky It’s for those who want to convert. 40-9 in the TSO is good to go. Just need barrel and mags. also would love to know if the barrel can handle 9major. Edited January 28, 2019 by Laxman2809 Link to comment Share on other sites More sharing options...
AsherRoe Posted June 23, 2019 Share Posted June 23, 2019 Did anyone ever get one of these to set a tso up for 9major ? Link to comment Share on other sites More sharing options...
Laxman2809 Posted June 23, 2019 Share Posted June 23, 2019 38 minutes ago, AsherRoe said: Did anyone ever get one of these to set a tso up for 9major ? Ream the barrel for longer seating Link to comment Share on other sites More sharing options...
igolfat8 Posted June 24, 2019 Share Posted June 24, 2019 I bought a new barrel from CZC and then I slugged the barrel to measure the ID and it measured .356” which is fine for copper jacketed bullets. I however, shoot coated lead and needed a .355” barrel, which CZC doesn’t make. Unfortunate because I had high hopes. They were kind enough to take mine back since I had never fired or fitted it. Link to comment Share on other sites More sharing options...
kuduman Posted July 23, 2019 Share Posted July 23, 2019 On 6/24/2019 at 12:44 AM, igolfat8 said: I bought a new barrel from CZC and then I slugged the barrel to measure the ID and it measured .356” which is fine for copper jacketed bullets. I however, shoot coated lead and needed a .355” barrel, which CZC doesn’t make. Unfortunate because I had high hopes. They were kind enough to take mine back since I had never fired or fitted it. Uh... you know you can order lead bullets in other sizes, right? Just order them .001" larger. Link to comment Share on other sites More sharing options...
Laxman2809 Posted July 23, 2019 Share Posted July 23, 2019 3 minutes ago, kuduman said: Uh... you know you can order lead bullets in other sizes, right? Just order them .001" larger. kuduman is totally correct. order the proper size and this shouldn't be an issue. Link to comment Share on other sites More sharing options...
igolfat8 Posted July 23, 2019 Share Posted July 23, 2019 1 hour ago, Laxman2809 said: kuduman is totally correct. order the proper size and this shouldn't be an issue. 1 hour ago, kuduman said: Uh... you know you can order lead bullets in other sizes, right? Just order them .001" larger. Well I do know that because I cast and powder coat my own . I have a boat load of .357’s sitting on the shelf and I actually prefer to shoot +.002” oversize and not .001” over as you’ve suggested. Link to comment Share on other sites More sharing options...
avastcosmicarena Posted July 26, 2019 Share Posted July 26, 2019 (edited) Very interested in how this thing would run major ammo. Hell, I guess it would be great as a 3-gun pistol with minor ammo with a decent comp even if it doesn't run major ammo well. Edited July 26, 2019 by avastcosmicarena Link to comment Share on other sites More sharing options...
robert.a.brewer. Posted June 16, 2020 Share Posted June 16, 2020 Anyone know a source for a 9 mm threaded TSO barrel? I am on the CZC email notification list because they are presently out of stock. Link to comment Share on other sites More sharing options...
robert.a.brewer. Posted June 18, 2020 Share Posted June 18, 2020 I am reminded KneelingAtlas posted a while back that Tornado Technology will turn down the end of your barrel, cut a male thread and add a threaded extension. This might be the way to go, as no fitting of the new barrel would be necessary. Link to comment Share on other sites More sharing options...
CZaddict Posted November 10, 2020 Share Posted November 10, 2020 (edited) Hey there i know this thread is old, but i recently just ordered one in 9mm for my TSO and it came in. installed with no fitting at all with a solid fit, i put a SJC 5 port compensator on it that i had re shaped for my old shadow target 2 and it looks really nice in my opinion. great budget czechmate alternative. Edited November 10, 2020 by CZaddict upload photo/ spelling Link to comment Share on other sites More sharing options...
Andy9 Posted November 13, 2020 Share Posted November 13, 2020 That is great!! I have thought processes going down this rabbit hole my self, Super cool to see that it has been done all ready. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now