Jayohee Posted December 14, 2018 Share Posted December 14, 2018 (edited) Does anyone use this setup and if so, what screws did you use to mount the holster to the hanger? The ones they come with are too short  TIA Edited December 15, 2018 by Jayohee Spelling Link to comment Share on other sites More sharing options...
Rich406 Posted December 15, 2018 Share Posted December 15, 2018 I had to go to the hardware store and get some longer screws, the ones they ship are way too short Link to comment Share on other sites More sharing options...
aandabooks Posted December 15, 2018 Share Posted December 15, 2018 Quote  The threads are 8-32. Don't go too long and have them sticking out into the holster. Link to comment Share on other sites More sharing options...
Jayohee Posted December 15, 2018 Author Share Posted December 15, 2018 Yeah that is what I’ve heard. I reached out to the BS Pro Shop and they said the ones that come with the Boss Hanger should also work. Unfortunately I’m still waiting on the holster to arrive so I can’t confirm Link to comment Share on other sites More sharing options...
Kilrb Posted December 15, 2018 Share Posted December 15, 2018 Mine fit fine, I did not have to change anything. Link to comment Share on other sites More sharing options...
vluc Posted December 15, 2018 Share Posted December 15, 2018 I believe I had to go with the shorter scores from the shop, not the standard. Gun past 2 inches. Link to comment Share on other sites More sharing options...
bjones6686 Posted December 19, 2018 Share Posted December 19, 2018 The screws that come with the boss hanger allowed me to mount a bladetech and red hill tactical holster with no problem. Link to comment Share on other sites More sharing options...
jcc7x7 Posted December 19, 2018 Share Posted December 19, 2018 RHT holster mounts to hanger just fine. Holster allowed gun to rock back and forth like a rocking horse though. FWIW, 2 times , two different guns So, I went back to DAA and Blade Tech holsters FWIW Link to comment Share on other sites More sharing options...
Jayohee Posted January 1, 2019 Author Share Posted January 1, 2019 I heard back from both RHT and BSPS (who sells the Boss Hanger).  RHT = Compatible with Boss but doesn’t include the correct length of screws. Made primarily for the Springer Precision hanger   BSPS = the screws which come with the hanger (currently on my Bladetech) should fit.  Worst case I’ll need to hit the hardware store and find the right ones. Shouldn’t be too hard, just annoying to not have the right screws readily available. Link to comment Share on other sites More sharing options...
rustychev Posted January 1, 2019 Share Posted January 1, 2019 Just got my rht and provided screws worked fine with boss hanger. Link to comment Share on other sites More sharing options...
anbrumm Posted January 3, 2019 Share Posted January 3, 2019 On 12/31/2018 at 9:50 PM, Jayohee said: I heard back from both RHT and BSPS (who sells the Boss Hanger).  RHT = Compatible with Boss but doesn’t include the correct length of screws. Made primarily for the Springer Precision hanger   BSPS = the screws which come with the hanger (currently on my Bladetech) should fit.  Worst case I’ll need to hit the hardware store and find the right ones. Shouldn’t be too hard, just annoying to not have the right screws readily available.  This was my experience. The screws that came with the holster were too short. The ones that came with the hanger were fine, and that's what I am using. Link to comment Share on other sites More sharing options...
clw42 Posted January 3, 2019 Share Posted January 3, 2019 I have (had) 2 of each and never needed to go to the hardware store. Single layer and double layer.  On 12/18/2018 at 10:19 PM, jcc7x7 said: RHT holster mounts to hanger just fine. Holster allowed gun to rock back and forth like a rocking horse though. FWIW, 2 times , two different guns So, I went back to DAA and Blade Tech holsters FWIW  Interesting, I didn't have this issue. The single layer did have less retention, so I used that for USPSA and Steel Challenge. The dual layer locked in tight so I used that for 3 gun. The only reason I sold them was because I've moved to open so I bought the Alpha-X. I figure I'll just get two inserts and use that for my Czechmate and Shadow 2. Link to comment Share on other sites More sharing options...
Adamj Posted January 8, 2019 Share Posted January 8, 2019 I had this exact setup and wound up using some left over screws from shotshell caddies because my holster screws were also too short. Once I got it locked it was rock solid though. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now