Woody3025 Posted March 3, 2019 Posted March 3, 2019 Definitely like the look of the short comp hope the performance matches the long. Sent from my iPhone using Tapatalk
AverageJoeShooting Posted March 3, 2019 Posted March 3, 2019 i mean if you get a similar amount of recoil reduction with the short i guess it would be worth it but i dont think that is the reality since its minus one port
IntenseImage Posted March 4, 2019 Posted March 4, 2019 I hope some of you who have been waiting managed to snag one of the 75+ that hit Davidsons today. Once again they got sucked up within minutes Sent from my SM-G955U using Tapatalk
Woody3025 Posted March 4, 2019 Posted March 4, 2019 Looks like there will be no shortages of open/unlimited shooters this year. Shot a match on Saturday and talked with some friends most of them are switching. Definitely going to even out the classes a little that’s not a bad thing.
IntenseImage Posted March 4, 2019 Posted March 4, 2019 Looks like there will be no shortages of open/unlimited shooters this year. Shot a match on Saturday and talked with some friends most of them are switching. Definitely going to even out the classes a little that’s not a bad thing. I really only planned to mess around in Open at one specific match we attend monthly (shooting my TacOps pistol/rifle). Now after shooting the VR80 in that all shotgun match I've changed over my registration for some larger matches ... And did this. Might as well go all in.Sent from my SM-G955U using Tapatalk
Underwood Posted March 4, 2019 Posted March 4, 2019 good choice.. Looks like we will have similar setups 3 hours ago, IntenseImage said: I really only planned to mess around in Open at one specific match we attend monthly (shooting my TacOps pistol/rifle). Now after shooting the VR80 in that all shotgun match I've changed over my registration for some larger matches ... And did this. Might as well go all in. Sent from my SM-G955U using Tapatalk
IntenseImage Posted March 4, 2019 Posted March 4, 2019 good choice.. Looks like we will have similar setups Figured just buying the PC top end and getting one 170mm extension was a quick way to go while keeping things very familiar. You running non ported? Sent from my SM-G955U using Tapatalk
AFguywhoshoots Posted March 5, 2019 Posted March 5, 2019 wait so you have the long comp on yours? i wasnt aware there is a short and long comp do you know if those 30 rd tooth and nail mags work? Craig Outzen has said the Tooth and Nail will work, but they don't drop free with the bolt back from what I gathered off Facebook. Some one said you can remove the tab that holds the bolt back in empty and they will drop free. This is all second hand info so take it with a grain of salt. Sent from my SM-G950U using Tapatalk
KyleJ Posted March 5, 2019 Posted March 5, 2019 These were supposed to go 'public' on the first. Has anyone seen them for sale in the wild yet? My FFL was supposed to have mine last week but I still haven't seen it yet.
AverageJoeShooting Posted March 5, 2019 Posted March 5, 2019 5 hours ago, Underwood said: good choice.. Looks like we will have similar setups i wanted to jump on the s&W open guns heres mine https://imgur.com/1LnmMXF sorry the picture is over the size limit so theres the hyperlink
AverageJoeShooting Posted March 5, 2019 Posted March 5, 2019 29 minutes ago, KyleJ said: These were supposed to go 'public' on the first. Has anyone seen them for sale in the wild yet? My FFL was supposed to have mine last week but I still haven't seen it yet. mine was supposed to show up sat...then today...and now hopefully tomorrow
IntenseImage Posted March 5, 2019 Posted March 5, 2019 Craig Outzen has said the Tooth and Nail will work, but they don't drop free with the bolt back from what I gathered off Facebook. Some one said you can remove the tab that holds the bolt back in empty and they will drop free. This is all second hand info so take it with a grain of salt. Sent from my SM-G950U using Tapatalk I gave the tab info ... No longer 2nd hand lol. I saw Craig note his T&N 19s run, haven't seen him talk about the 24 or 28 Sent from my SM-G955U using Tapatalk
IntenseImage Posted March 5, 2019 Posted March 5, 2019 i wanted to jump on the s&W open guns heres mine https://imgur.com/1LnmMXF sorry the picture is over the size limit so theres the hyperlinkI'm waiting to grab one of those Springer rackers tooSent from my SM-G955U using Tapatalk
AverageJoeShooting Posted March 5, 2019 Posted March 5, 2019 1 hour ago, IntenseImage said: I gave the tab info ... No longer 2nd hand lol. I saw Craig note his T&N 19s run, haven't seen him talk about the 24 or 28 Sent from my SM-G955U using Tapatalk To be honest I'm willing to spend the change to try the 29 rd t&n. Its a game changer if it works
AverageJoeShooting Posted March 5, 2019 Posted March 5, 2019 1 minute ago, IntenseImage said: I'm waiting to grab one of those Springer rackers too Sent from my SM-G955U using Tapatalk Waiting for what? Are they out of stock? I will say of all the things I've done to this gun replacing the retention plate to install this racket has been the biggest pain in the ass
IntenseImage Posted March 5, 2019 Posted March 5, 2019 To be honest I'm willing to spend the change to try the 29 rd t&n. Its a game changer if it worksI'm putting some random cash on the side to get one ... I've heard some basepads might be in the works so I'm holding off on the 24rd right nowSent from my SM-G955U using Tapatalk
IntenseImage Posted March 5, 2019 Posted March 5, 2019 Waiting for what? Are they out of stock? I will say of all the things I've done to this gun replacing the retention plate to install this racket has been the biggest pain in the assJust need to get it lol ... I've taken that end plate off 100s of times. Should be simpleSent from my SM-G955U using Tapatalk
AverageJoeShooting Posted March 5, 2019 Posted March 5, 2019 Just now, IntenseImage said: I'm putting some random cash on the side to get one ... I've heard some basepads might be in the works so I'm holding off on the 24rd right now Sent from my SM-G955U using Tapatalk Base pads for which mag?
IntenseImage Posted March 5, 2019 Posted March 5, 2019 Base pads for which mag?Any of the VR mags ... Might not be extended though just metal to replace the factory plastic - will need to wait and seeSent from my SM-G955U using Tapatalk
AverageJoeShooting Posted March 5, 2019 Posted March 5, 2019 1 minute ago, IntenseImage said: Just need to get it lol ... I've taken that end plate off 100s of times. Should be simple Sent from my SM-G955U using Tapatalk Yea when I did it, it was literally the first time that plate had ever been removed. So it was stiff and hateful.
AverageJoeShooting Posted March 5, 2019 Posted March 5, 2019 2 minutes ago, IntenseImage said: Any of the VR mags ... Might not be extended though just metal to replace the factory plastic - will need to wait and see Sent from my SM-G955U using Tapatalk I'm going to order one of those t&n 29 rd mags and when my vr finally gets to me I'll post a video of how they run or if they run
IntenseImage Posted March 5, 2019 Posted March 5, 2019 3 minutes ago, AverageJoeShooting said: I'm going to order one of those t&n 29 rd mags and when my vr finally gets to me I'll post a video of how they run or if they run Sounds good, I will be doing the same once I finally get one. Im wondering how long they will take to ship since they say its "pre order" and no ETA available A buddy of mine said he ordered the MKA1919 20rd drum so ill try to do a video of that, including swapping the tower out to an actual VR mag to hopefully increase reliability should someone really want to run a drum
IntenseImage Posted March 6, 2019 Posted March 6, 2019 Ok fine ... I ordered the 29rd mag tonightSent from my SM-G955U using Tapatalk
Woody3025 Posted March 6, 2019 Posted March 6, 2019 Don’t you just hate that conversation you have in your head debating on wether or not you need a particular gun part versus you just really really want it.
IntenseImage Posted March 6, 2019 Posted March 6, 2019 Don’t you just hate that conversation you have in your head debating on wether or not you need a particular gun part versus you just really really want it. [emoji23][emoji23]I sold a PAR meter I wasnt using for a saltwater fishtank lol .. the wife can't complain nowSent from my SM-G955U using Tapatalk
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now