Underwood Posted July 5, 2019 Share Posted July 5, 2019 3 hours ago, BoyGlock said: Its stock. Only a red dot was added. Ammo is armscor 1,250+ fps 1/75 is not enough. Not even near comparable to my 1301c. verify all three of the gas ports have been drilled all the way threw and are the same diameter Link to comment Share on other sites More sharing options...
BoyGlock Posted July 6, 2019 Share Posted July 6, 2019 9 hours ago, AverageJoeShooting said: I mean the magazines not working, yes that's something that needs looked at, but 1 in 75 shots misreading? At that point just extract the round with the charging handle and keep going I release the mag and jammed round at the same time while holding the bolt retracted and insert a fresh mag. The jammed round is only on the chamber mouth angled up on the ramp and cannot be ejected via extractor. Link to comment Share on other sites More sharing options...
AverageJoeShooting Posted July 6, 2019 Share Posted July 6, 2019 After shooting a 32 rd all shotgun course about 10 mins ago I can confirm two things 1. My bleeding finger absolutely needs a larger charging handle. This little nub just doesnt do it. 2. 28 rd mag is a novelty and the 19 rd is way more worth it. All the 28 rd mag gave me was misfeeds and problems Link to comment Share on other sites More sharing options...
mikeAZ Posted July 6, 2019 Share Posted July 6, 2019 Anyone tried the 20 rd. drum yet..... I actually saw one work n a Saiga once. Had a 1919, never did get the 23 rounder to function from day one...... Link to comment Share on other sites More sharing options...
ctay Posted July 6, 2019 Share Posted July 6, 2019 After shooting a 32 rd all shotgun course about 10 mins ago I can confirm two things 1. My bleeding finger absolutely needs a larger charging handle. This little nub just doesnt do it. 2. 28 rd mag is a novelty and the 19 rd is way more worth it. All the 28 rd mag gave me was misfeeds and problems Colorado 3 gun?Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
AverageJoeShooting Posted July 6, 2019 Share Posted July 6, 2019 27 minutes ago, ctay said: Colorado 3 gun? Sent from my iPhone using Tapatalk North Carolina 3gun Link to comment Share on other sites More sharing options...
IntenseImage Posted July 6, 2019 Share Posted July 6, 2019 After shooting a 32 rd all shotgun course about 10 mins ago I can confirm two things 1. My bleeding finger absolutely needs a larger charging handle. This little nub just doesnt do it. 2. 28 rd mag is a novelty and the 19 rd is way more worth it. All the 28 rd mag gave me was misfeeds and problems If you plan and shoot to it that CH never even comes into play. My 28 runs all day long and in multiple guns ... Talk to Tooth if yours doesntSent from my SM-G975U using Tapatalk Link to comment Share on other sites More sharing options...
AverageJoeShooting Posted July 7, 2019 Share Posted July 7, 2019 1 hour ago, IntenseImage said: If you plan and shoot to it that CH never even comes into play. My 28 runs all day long and in multiple guns ... Talk to Tooth if yours doesnt Sent from my SM-G975U using Tapatalk You have multiple vr80s? Link to comment Share on other sites More sharing options...
IntenseImage Posted July 7, 2019 Share Posted July 7, 2019 You have multiple vr80s?I don't but Ive let others use the mag in their VR80s at matches. At this point the VR80s are well outnumbering the VEPRs [emoji41]Sent from my SM-G975U using Tapatalk Link to comment Share on other sites More sharing options...
mattmann Posted July 7, 2019 Share Posted July 7, 2019 After shooting a 32 rd all shotgun course about 10 mins ago I can confirm two things 1. My bleeding finger absolutely needs a larger charging handle. This little nub just doesnt do it. 2. 28 rd mag is a novelty and the 19 rd is way more worth it. All the 28 rd mag gave me was misfeeds and problems Glad to hear this. Just got 2-19rd mags tonight. I could justify the cost of the 28rd mags. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Underwood Posted July 10, 2019 Share Posted July 10, 2019 Anyone have updates on aftermarket triggers yet ?? Link to comment Share on other sites More sharing options...
Underwood Posted July 10, 2019 Share Posted July 10, 2019 Got a reply from Elftmann today.. within 20 mins of sending them an email Quote Hello Phil.Thank you for your inquiry. We are currently having serious discussion about making the VR80 our next trigger to release. Nothing has been officially decided. We have recently just completed the Savage which will come out in the next few weeks. I would say there is a good chance the VR80 will be one of our next projects.Thank you.Sincerely,Elftmann - GTB Link to comment Share on other sites More sharing options...
VU2AKILL Posted July 10, 2019 Share Posted July 10, 2019 1 hour ago, Underwood said: Got a reply from Elftmann today.. within 20 mins of sending them an email This is good news. If Tooth and Nail doesn't ship my pre-order next week like they said, I will be cancelling the order and looking for something else. Link to comment Share on other sites More sharing options...
TRUBL Posted July 13, 2019 Share Posted July 13, 2019 On 7/6/2019 at 8:42 AM, AverageJoeShooting said: After shooting a 32 rd all shotgun course about 10 mins ago I can confirm two things 1. My bleeding finger absolutely needs a larger charging handle. This little nub just doesnt do it. 2. 28 rd mag is a novelty and the 19 rd is way more worth it. All the 28 rd mag gave me was misfeeds and problems TACCOM will have news on a kick butt charge handle by this next Friday......with an off chance of even having them available. Link to comment Share on other sites More sharing options...
VU2AKILL Posted July 16, 2019 Share Posted July 16, 2019 On 7/6/2019 at 7:42 AM, AverageJoeShooting said: After shooting a 32 rd all shotgun course about 10 mins ago I can confirm two things 1. My bleeding finger absolutely needs a larger charging handle. This little nub just doesnt do it. 2. 28 rd mag is a novelty and the 19 rd is way more worth it. All the 28 rd mag gave me was misfeeds and problems The bolt release is an angry piece of metal in a terrible place and has claimed several chunks of flesh from my hand while charging the gun!! Link to comment Share on other sites More sharing options...
Underwood Posted July 16, 2019 Share Posted July 16, 2019 4 hours ago, VU2AKILL said: The bolt release is an angry piece of metal in a terrible place and has claimed several chunks of flesh from my hand while charging the gun!! Most of us here locally have removed the bolt release Link to comment Share on other sites More sharing options...
AverageJoeShooting Posted July 16, 2019 Share Posted July 16, 2019 1 minute ago, Underwood said: Most of us here locally have removed the bolt release The phase 5 works on the vr 80???? Link to comment Share on other sites More sharing options...
Underwood Posted July 16, 2019 Share Posted July 16, 2019 4 hours ago, AverageJoeShooting said: The phase 5 works on the vr 80???? Link to comment Share on other sites More sharing options...
BoyGlock Posted July 17, 2019 Share Posted July 17, 2019 (edited) After several hundred rounds my sg jams badly on hot slug ammo 1oz at 1,600 fps. Bird and buck are 100% in std and reduced loads. All Armscor ammo, other brands are not in market, gas valve is std in the gun no spare. Everything is stock including mags. What and where to look? Dont have gs near me to look into it so it will be all diy proposition. Eta. Jams are all misfeeds. Retrack bolt a little and push it gently forward to chamber the round. Edited July 17, 2019 by BoyGlock Link to comment Share on other sites More sharing options...
Underwood Posted July 17, 2019 Share Posted July 17, 2019 Try backing the buffer tube out a half turn at a time till it cycles Link to comment Share on other sites More sharing options...
BoyGlock Posted July 18, 2019 Share Posted July 18, 2019 10 hours ago, Underwood said: Try backing the buffer tube out a half turn at a time till it cycles Pardon my ignorance, what direction to turn? Link to comment Share on other sites More sharing options...
RH45 Posted July 18, 2019 Share Posted July 18, 2019 18 minutes ago, BoyGlock said: Pardon my ignorance, what direction to turn? Lefty loosely-righty tighty (or, counter-clockwise to back out) Link to comment Share on other sites More sharing options...
SQUIDload Posted July 18, 2019 Share Posted July 18, 2019 On 7/4/2019 at 4:24 PM, outerlimits said: solved... Just got my gun today. Went to break it in and burnt my hand a bit. I’m guessing that’s why you have a wrap! What are you using and how is it holding up? I was thinking just athletic tape... Link to comment Share on other sites More sharing options...
outerlimits Posted July 18, 2019 Share Posted July 18, 2019 12 hours ago, SQUIDload said: Just got my gun today. Went to break it in and burnt my hand a bit. I’m guessing that’s why you have a wrap! What are you using and how is it holding up? I was thinking just athletic tape... credit craig outzen for this. its zeo toxon insulation wrap. Link to comment Share on other sites More sharing options...
SQUIDload Posted July 18, 2019 Share Posted July 18, 2019 (edited) thank you sir!!! Advanced Tactical just told me it will be months before they get new long comps! Is there another manufacturer? Or should I just go with the old version? Edited July 18, 2019 by SQUIDload Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now