Jump to content
Brian Enos's Forums... Maku mozo!
highhope

holosun 510C is huge

Recommended Posts

On 12/5/2018 at 8:56 PM, highhope said:

 As I know, Tevo Sports is the only company making mounts for it .....

Tiger is an amazing person to deal with. 

Share this post


Link to post
Share on other sites

I shot with Tiger this year at Area 2.  Real nice guy. Wasn't shy about letting you handle his gun in the safe area. His mount is solid

Share this post


Link to post
Share on other sites

Hello: I guess I will have to order one up from Tevo and give it a try. It will get a full testing here so we will see how it works out. Thanks, Eric

Share this post


Link to post
Share on other sites
On 12/5/2018 at 8:39 AM, highhope said:

I am using 4 -60 screws, and one-side mount. will see how that mount hold. BTW, 510c is lighter than cmore slideride, many shooters use one side mount for cmore, right? 

 

I did use the Top mounted for my Cmore at first. Then switched over to the 90 degree mount.

 

I always see these 501C's advertised with the DoveTail mount. So you can remove the Dove Tail and somewhere from the top, are holes for the 4-60 screws? I saw a GM using one at a match, but never knew how he mounted it to the top mount he was using.

Share this post


Link to post
Share on other sites

Hello: there are 4 mounting screws for the Holosun 510C dovetail base. Remove the screws and the base comes off. You can also remove the metal shield cover if you want it lighter although it is very light and adds protection. I have everything ordered and will see how it does. I went with the single sided mount since that is what I am using right now on one of my open pistols. I really like the Holosun 510C on my PCC's so it should be good on my open pistol. Thanks, Eric

Share this post


Link to post
Share on other sites
1 hour ago, Aircooled6racer said:

Hello: there are 4 mounting screws for the Holosun 510C dovetail base. Remove the screws and the base comes off. You can also remove the metal shield cover if you want it lighter although it is very light and adds protection. I have everything ordered and will see how it does. I went with the single sided mount since that is what I am using right now on one of my open pistols. I really like the Holosun 510C on my PCC's so it should be good on my open pistol. Thanks, Eric

 

Thanks Eric. What's the difference between single sided mount? Is there a double sided or 90 degree mount type? Is single sided mount where the 510C is straight up over the top of the slide? Or 90 degrees to the slide? Thanks.

Share this post


Link to post
Share on other sites
 
Thanks Eric. What's the difference between single sided mount? Is there a double sided or 90 degree mount type? Is single sided mount where the 510C is straight up over the top of the slide? Or 90 degrees to the slide? Thanks.


Single sided mount
d92bc2662411c2e5ebef6509ebcae303.jpg


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
2 hours ago, kujo929 said:

 


Single sided mount
d92bc2662411c2e5ebef6509ebcae303.jpg


Sent from my iPhone using Tapatalk

 

 

Sweet!

 

Thanks Kujo. Really like what you going on there, dust cover looks fine too, bet it's a keeper.

 

Share this post


Link to post
Share on other sites
 
Sweet!
 
Thanks Kujo. Really like what you going on there, dust cover looks fine too, bet it's a keeper.
 

Unfortunately that ones not mine. That is photo I was sent when I asked the mount manufacturer if it would work on an Atlas.


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

I tried to get as good of a picture as i could of the brightness and sizes of the 510c vs DPP. The DPP is just a little bit brighter but not a ton but since it is brighter it gives a little bit more of a starburst look in the picture.

1209181511_HDR-2080x1170.jpg

Share this post


Link to post
Share on other sites

Hello: Well half of my setup arrived today. I took the mount and hood off the Holosun 510C and will weight it to see how it compares to a C-More slide ride. Just in my hands it feels heavier than a plastic C-More but pretty close to a metal C-More. I love the really clear small dot and the large glass on the Holosun. I will see how it works out very soon but expect it to be as nice as the ones on my PCC's and 15/22. Thanks, Eric

Share this post


Link to post
Share on other sites

I have them on my pcc and 15/22 but just can't make the jump from RTS2's on my open guns. 

Edited by echotango

Share this post


Link to post
Share on other sites

Hello: I never made the jump to the RTS2 since so many around here have had problems with them. They were just not holding up very well and some that changed over that I saw did not shoot them as well. Some went back to the original C-More and some went a different route. I guess I will be the test mule around here on an open pistol. Looking forward to the testing and will see how my match results are. Thanks, Eric

Share this post


Link to post
Share on other sites

I found a cover for the 510c its not a perfect fit but it does fit pretty good, its made by Scopecoat and is made for the eotech EXPS 2 or 3. This is the item number SCP12HE11BK i got it on amazon. 

Share this post


Link to post
Share on other sites

I put a 510C on my MPX for PCC and immediately after shooting it thought - how good would it be if you could mount this on a pistol.  If anyone has run it, can you share the offset at 3m with a 18 or 20m zero - I'm going to guess its at least 2" or so.

Thanks,

Tom

Share this post


Link to post
Share on other sites

I think they look too big and bulky on an open gun. I might try one on my carbine though

Share this post


Link to post
Share on other sites
6 hours ago, Sarge said:

I think they look too big and bulky on an open gun. I might try one on my carbine though

 

Agreed!  I did order one yesterday to test on my latest pcc.  Currently shooting c-more for steel, and vipers for run and gun.

We shall see 🙂

Share this post


Link to post
Share on other sites
I think they look too big and bulky on an open gun. I might try one on my carbine though

I absolutely agree they aren’t aesthetically pleasing, they may begin to look better if they prove to hold up.

Share this post


Link to post
Share on other sites

Looks or not I’ll give it a shot to try a larger window...


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

My bad eyes + big window + bright dot = longevity 

 

its  a win win for me 👍

Share this post


Link to post
Share on other sites

Do the mount screws come down from the top, or up from the bottom when you remove the mount it comes with ??

Share this post


Link to post
Share on other sites

Do the mount screws come down from the top, or up from the bottom when you remove the mount it comes with ??

Share this post


Link to post
Share on other sites

Do the mount screws come down from the top, or up from the bottom when you remove the mount it comes with ??

Share this post


Link to post
Share on other sites

Hello: The mounting screws are in the bottom to answer your question 3 times 😛 You use the same 4 screws to mount to the Tevo mount. Screws are Torx head. Thanks, Eric

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...