imhotep561 Posted November 24, 2018 Share Posted November 24, 2018 Hello, I was hoping to get some feedback on a good recoil spring weight for a .40 full-size p320. I recently purchased a full-size .40 slide from gunbroker and picked up a fat stainless guide rod so I could adjust the spring weight. I called Sig inquiring about the factory spring weight for the .40 and they said it was 20lb. so I played it safe and bought a 18.5lb 1911 spring. It works fine however I feel like I could go lower and would like the gun to shoot a bit flatter. A guy at a USPSA match last week said I could go to 15lb, but that seemed a bit low. I am aware the big factor with all of this is the ammo, so to keep it simple I shoot factory Blazer 180gr Blazer FMJ and Hornady 125gr frangible. Any ideas on how low I could with a recoil spring with this ammo? Thanks in advance Quote Link to post Share on other sites
jcc7x7 Posted November 25, 2018 Share Posted November 25, 2018 15 to18.5 Quote Link to post Share on other sites
APL-G35 Posted December 23, 2018 Share Posted December 23, 2018 I’d try a 16lb with that setup. Quote Link to post Share on other sites
BillGarlandJr Posted December 24, 2018 Share Posted December 24, 2018 15 or 16lbs. Might even be able to go as low as 14 and be ok. Quote Link to post Share on other sites
A.J. Stuart Posted January 2, 2019 Share Posted January 2, 2019 I ran a 16 pound wolff with about 2 -3 coils cut off of it. On a Graygun's steel rod. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.