Jump to content
Brian Enos's Forums... Maku mozo!
jeremy kemlo

Load for shadow two using these components

Recommended Posts

Shadow 2. 9mm 147 grain flat point bayou bullets. mixed brass Federal small pistol primers titegroup powder. 

Who’s got a good recipe for me?

Share this post


Link to post
Share on other sites

Start at 2.9gr at an OAL that works for your chamber and work your way up to the power factor you desire


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

I’d try 3.0gr and work up. With your barrel, you will probly hit power factor around 3.1-3.2ish. I can’t tell you OAL length. Do the plunk test to figure it out. 

Share this post


Link to post
Share on other sites

I use 3.2 grains @ OAL of 1.15.  Gives me a 137 pf out of a Shadow.  I throated my barrel as well so I could load out longer.

Share this post


Link to post
Share on other sites

I got a shadow 2 a few months back can't say about the  powder but the oal that is working good for me is 1.110 oal using acme 147 f/p coated don't know if the bayou profile is close to the same or not but you have to load on the short side for the Cz.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×