corbinfouquet Posted July 10, 2018 Share Posted July 10, 2018 Does anyone have load data for 9 major. What type of gun are you running? I'll be using autocomp with pd bullets 124gr. Link to comment Share on other sites More sharing options...
36873687 Posted July 10, 2018 Share Posted July 10, 2018 Ck full size aa7 9.7. 1.165 Pd jhp124. An 10.5 aa7 1.165 pd 115 jhp Link to comment Share on other sites More sharing options...
Sarge Posted July 10, 2018 Share Posted July 10, 2018 1 hour ago, corbinfouquet said: Does anyone have load data for 9 major. What type of gun are you running? I'll be using autocomp with pd bullets 124gr. That’s an easy search in the 9MAJOR Reloading Section. I use WAC exclusively and am also switching over to PD 124 JHP. I’ll probably end up somewhere around 7.2ish @ about 1.165ish. Give or take. Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted July 11, 2018 Share Posted July 11, 2018 I've been using 6.8 gr WAC under a 124 gr MG JHP at 1.160" in my TruBor for years. PLEASE don't try to load 9mm Major without a chronograph Link to comment Share on other sites More sharing options...
RiggerJJ Posted July 11, 2018 Share Posted July 11, 2018 (edited) Do what everyone else has to; Read a whole lot of posts here using search. Get a crono. Start low using published data, and work up. Be careful. Edited July 11, 2018 by RiggerJJ Link to comment Share on other sites More sharing options...
jcc7x7 Posted July 12, 2018 Share Posted July 12, 2018 6.8 grs 124 pd Fed sm rifle primers 1.165 170-172 pf depends on gun Link to comment Share on other sites More sharing options...
SWprotected Posted July 12, 2018 Share Posted July 12, 2018 On 7/10/2018 at 7:29 PM, Sarge said: That’s an easy search in the 9MAJOR Reloading Section. I use WAC exclusively and am also switching over to PD 124 JHP. I’ll probably end up somewhere around 7.2ish @ about 1.165ish. Give or take. I use 7.2 and a 124PD in my Limcat with 6 holes and makes about 174PF, that same load in my friends CK was 178PF. The KKM barrels are pretty fast. Link to comment Share on other sites More sharing options...
Maximis228 Posted July 12, 2018 Share Posted July 12, 2018 I load 7.4 of WAC under a 124 PD in 9 major. Hit 181 PF at Ryan rocks over the weekend. I have 3 large holes in my hybrid barrel. Link to comment Share on other sites More sharing options...
schaet Posted July 12, 2018 Share Posted July 12, 2018 I'm using 8.0 of HS6 under 124 Everglades FMJ and 1.15 OAL . .producing ~178 PF. Shuemann AET 1x24 twist and Binary Engine comp - No Popple holes Link to comment Share on other sites More sharing options...
EEH Posted July 12, 2018 Share Posted July 12, 2018 I remember two years ago, I was wondering the same thing . began reading open gun post and pm’ed a couple people. Made my decision on what I read, tried two powders and liked one . Made up some loads haven’t looked back. you can find a lot of information in reloading for open gun post . Link to comment Share on other sites More sharing options...
g mac Posted July 14, 2018 Share Posted July 14, 2018 7.5 grns ram shot silhouette... 124 grs Montana gold or blue bullet...1.155-1.165" oal Link to comment Share on other sites More sharing options...
echotango Posted July 14, 2018 Share Posted July 14, 2018 (edited) 124 MG w/ 6.8 WAC @ 1.165" 121 MG w/ 7.0 WAC @ 1.165" 115 MG w/ 7.3 WAC @ 1.165" All 170pf with 3 brl holes Edited July 14, 2018 by echotango Link to comment Share on other sites More sharing options...
corbinfouquet Posted July 14, 2018 Author Share Posted July 14, 2018 20 minutes ago, echotango said: 124 MG w/ 6.8 WAC @ 1.165" 121 MG w/ 7.0 WAC @ 1.165" 115 MG w/ 7.3 WAC @ 1.165" All 170pf with 3 brl holes Thanks a bunch. I'll start a little lower and work up. Thanks for sharing Link to comment Share on other sites More sharing options...
S&W686 Posted July 17, 2018 Share Posted July 17, 2018 (edited) Here is what I have been running: 115gr JHP Montana Gold 7.8gr Autocomp C.O.L. 1.165-70 Federal Small Rifle Primers or 124gr JHP Montana Gold 7.1gr Autocomp C.O.L. 1.165-70 Federal Small Rifle Primers Edited July 17, 2018 by S&W686 Link to comment Share on other sites More sharing options...
corbinfouquet Posted July 17, 2018 Author Share Posted July 17, 2018 14 minutes ago, S&W686 said: Here is what I have been running: 115gr JHP Montana Gold 7.8gr Autocomp C.O.L. 1.165-70 Federal Small Rifle Primers or 124gr JHP Montana Gold 7.1gr Autocomp C.O.L. 1.165-70 Federal Small Rifle Primers Thanks a bunch. I probably should of asked when I got the gun. But the gun runs like a top Link to comment Share on other sites More sharing options...
Sarge Posted July 17, 2018 Share Posted July 17, 2018 On 7/14/2018 at 9:44 AM, echotango said: 124 MG w/ 6.8 WAC @ 1.165" 121 MG w/ 7.0 WAC @ 1.165" 115 MG w/ 7.3 WAC @ 1.165" All 170pf with 3 brl holes I can't help but notice how fast those are. what barrel is this out of? I have KKM and Schueman barrels in my full size guns with no holes and it takes 7.4 WAC to get MG121's to 172-3 and 7.8 to get MG115JHP's to the same PF. Link to comment Share on other sites More sharing options...
echotango Posted July 17, 2018 Share Posted July 17, 2018 (edited) 46 minutes ago, Sarge said: I can't help but notice how fast those are. what barrel is this out of? I have KKM and Schueman barrels in my full size guns with no holes and it takes 7.4 WAC to get MG121's to 172-3 and 7.8 to get MG115JHP's to the same PF. The 121/124 were out of 4 guns, 3 kkm, 1 schuemann. The 115 are only out of my new guns, both kkm(both within <1pf). . It's funny you mention that as I loaded 7.3 to 7.8 in .1 increments from what I read here. I stopped at 7.4 when chronoing. We are at approx 1800ft above sea level. At 5000 I chrono'd 174 at a level 2 match with the 121's. Edited July 17, 2018 by echotango Link to comment Share on other sites More sharing options...
TRPOperator Posted July 17, 2018 Share Posted July 17, 2018 I run 124grn PD at 1.165 using 7.2 grns of WAC makes Major at 169-171ish in both open gun One is a SV Barrel the other a KKM. KKM is Akai V6 hole SV is Akai V4 hole Link to comment Share on other sites More sharing options...
abigger04 Posted July 18, 2018 Share Posted July 18, 2018 On 7/10/2018 at 5:32 PM, 36873687 said: An 10.5 aa7 1.165 pd 115 jhp On 7/10/2018 at 5:32 PM, 36873687 said: Ck full size aa7 9.7. 1.165 Pd jhp124. An 10.5 aa7 1.165 pd 115 jhp These are really close to what I'm running. AA7 10.3 Grain, 115 MG JHP - 170 pf AA7 9.3 Grain, 124 Hornady XTP JHP - 168 pf Lone Star Innovations 2011, kkm barrel, v4 holes Link to comment Share on other sites More sharing options...
36873687 Posted July 18, 2018 Share Posted July 18, 2018 25 minutes ago, abigger04 said: These are really close to what I'm running. AA7 10.3 Grain, 115 MG JHP - 170 pf AA7 9.3 Grain, 124 Hornady XTP JHP - 168 pf Lone Star Innovations 2011, kkm barrel, v4 holes Yep must be a fast barrel. I have Kim 3 pooples. 173 pf with 124 jhp an 171 pf with 115 jhp Link to comment Share on other sites More sharing options...
tswisher21 Posted July 18, 2018 Share Posted July 18, 2018 MY LOAD IS 6.8 AUTOCOMP 124 EGGLESTON COATED BULLET,1.165 OAL MIXED BRASS. OUT OF STI DVC OPEN NO HOLES 1380 FPS THIS IS FROM MEMORY .I AM AWAY FROM HOME RIGHT NOW. Link to comment Share on other sites More sharing options...
dansedgli Posted August 1, 2018 Share Posted August 1, 2018 Are small pistol primers ok to use in 9 major with autocomp? Link to comment Share on other sites More sharing options...
echotango Posted August 2, 2018 Share Posted August 2, 2018 Yes Link to comment Share on other sites More sharing options...
dansedgli Posted August 2, 2018 Share Posted August 2, 2018 Thanks, want to rebarrel my 38 super but also have 25000 primers on the way. Link to comment Share on other sites More sharing options...
chevrofreak Posted August 2, 2018 Share Posted August 2, 2018 1 hour ago, dansedgli said: Are small pistol primers ok to use in 9 major with autocomp? Don't go too hot and you should be fine. With S&B SPP I had primers getting blown out at just 7.2gr with a 124gr bullet. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now