love2fishnshoot Posted July 3, 2018 Author Share Posted July 3, 2018 Yep. Dummy. No primer. I pull the slide back and release Link to comment Share on other sites More sharing options...
my00wrx1 Posted July 3, 2018 Share Posted July 3, 2018 Check the crimp and OAL. RN or HP projectile? Link to comment Share on other sites More sharing options...
love2fishnshoot Posted July 3, 2018 Author Share Posted July 3, 2018 RN I’ve got a Manson reamer coming and I’ll open it up a little so that should solve all my issues Link to comment Share on other sites More sharing options...
zzt Posted July 3, 2018 Share Posted July 3, 2018 (edited) Look, it's a new gun. It will take 500 rounds before everything smooths out all by itself. Stop sanding and polishing. Load your mags fully and let them sit for at least a full week. If you shoot sooner, fill them again and let them sit. After two weeks the springs will have taken a set and feeding will be smooth. You opened you feed lips too wide and that caused your later problem. Close the front up slightly so the top round points to the top of the feed ramp, not the chamber. You should not have to ream the chamber. If you want to load long because you are using a fluffy powder, you may have to throat your barrel, not ream the chamber. Here is a picture showing case fills for Major with a 115gr bullet. Edited July 3, 2018 by zzt Link to comment Share on other sites More sharing options...
love2fishnshoot Posted July 4, 2018 Author Share Posted July 4, 2018 Yea I understand that. I’ve got a few hundred rounds waiting for me at the farm tomorrow to blow through Link to comment Share on other sites More sharing options...
Sen Posted June 5, 2021 Share Posted June 5, 2021 I just bought a cz chechmate and got some problem Link to comment Share on other sites More sharing options...
George16 Posted June 5, 2021 Share Posted June 5, 2021 5 minutes ago, Sen said: I just bought a cz chechmate and got some problem What’s your problem? It’ll help if you tell us what it is . Link to comment Share on other sites More sharing options...
frgood Posted June 5, 2021 Share Posted June 5, 2021 On 7/2/2018 at 1:53 AM, love2fishnshoot said: Loaded each mag to 10 rds. I noticed they were a little tougher to load rounds into In what way were the rounds tougher to load? Stiff spring? Rounds a smidge long? Link to comment Share on other sites More sharing options...
muncie21 Posted June 6, 2021 Share Posted June 6, 2021 22 hours ago, Sen said: I just bought a cz chechmate and got some problem If you read page 1 the OP's original problem was fixed by opening up the feedlips of the mags. Second issue was because the OAL of the ammo he was using was too long. CZs tend to like shorter length ammo. I run the 9mm loads for my CZs at 1.08 to 1.10 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now