moonshoxx Posted June 17, 2018 Share Posted June 17, 2018 Title says it all. Find myself woth big jug of wst. Have titegroup that i normally load with but would like to use the wst for 40 Link to comment Share on other sites More sharing options...
bulm540 Posted June 19, 2018 Share Posted June 19, 2018 (edited) i load 4.3 grains and I'm making 172 PF in my TSS long slide. I'm using BBIs moly coated 180s. Edited June 19, 2018 by bulm540 Link to comment Share on other sites More sharing options...
Doublehelix Posted June 19, 2018 Share Posted June 19, 2018 I am loading 4.6 WST behind a BBI 180 gr. coated bullet in my 5" Benny Hill STI Limited at 1.180". Link to comment Share on other sites More sharing options...
moonshoxx Posted June 20, 2018 Author Share Posted June 20, 2018 Thanks guys. I may middle yall Link to comment Share on other sites More sharing options...
moonshoxx Posted June 20, 2018 Author Share Posted June 20, 2018 I assume wst is working out fine Link to comment Share on other sites More sharing options...
bulm540 Posted June 20, 2018 Share Posted June 20, 2018 (edited) 23 hours ago, moonshoxx said: I assume wst is working out fine All I use in production and limited. I did bumped it up years ago ay a state match by 3 /10 s of a grain since it was going to be hot and I chronoed about 182 pf. Edited June 21, 2018 by bulm540 Link to comment Share on other sites More sharing options...
rdinga Posted June 21, 2018 Share Posted June 21, 2018 3.8 grains of WST with a SNS 180. Soft, accurate and reliable in all of my guns Link to comment Share on other sites More sharing options...
bulm540 Posted June 21, 2018 Share Posted June 21, 2018 1 hour ago, rdinga said: 3.8 grains of WST with a SNS 180. Soft, accurate and reliable in all of my guns for Major? Link to comment Share on other sites More sharing options...
pbcaster45 Posted June 21, 2018 Share Posted June 21, 2018 You did ask for plated loads so... Gun: 5 inch STI Edge Bullet: Bullet Works 180 gr. RNFP Plated Powder: Winchester WST 4.3 grs. Primer: Winchester Small Pistol Case: Federal LOAL: 1.180 Avg. Vel.: 837.86 fps ES: 47.10 SD: 16.24 PF: 150 Recoil Spring: Dawson tool-less guide rod, 12 lb. Recoil Spring and Buffer Pad Bullet: Bullet Works 180 gr. RNFP Plated Powder: Winchester WST 4.5 grs. Primer: Winchester Small Pistol Case: Federal LOAL: 1.180 Avg. Vel.: 888.42 fps ES: 36.76 SD: 12.96 PF: 159 Recoil Spring: Dawson tool-less guide rod, 12 lb. Recoil Spring and Buffer Pad Comments: 159 PF Bullet: Bullet Works 180 gr. RNFP Plated Powder: Winchester WST 5.0 grs. Primer: Winchester Small Pistol Case: Winchester LOAL: 1.200 Avg. Vel.: 959.61 fps ES: 42.27 SD: 13.89 PF: 172 Recoil Spring: Tool-less guide rod, 14 lb. Recoil Spring & Aluma Buffer Pad Link to comment Share on other sites More sharing options...
moonshoxx Posted June 28, 2018 Author Share Posted June 28, 2018 (edited) So for plated its looking like 5.0 and around 4.5 for moly although ill be a little shorter than the 1.2 Edited June 28, 2018 by moonshoxx Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now