Alaskapopo Posted June 12, 2018 Share Posted June 12, 2018 Got a 627 converted to 9mm and my reloads won't chamber. They case gauged but no dice in the cylinder . What are you guys using to size your brass. Factory ammo fits fine. Pat Link to comment Share on other sites More sharing options...
jdk62738super Posted June 12, 2018 Share Posted June 12, 2018 I use dillon 9mm die set in my square deal works in my 929. John Link to comment Share on other sites More sharing options...
missed it by that much Posted June 12, 2018 Share Posted June 12, 2018 I have a Lee works in my 929 Sent from my SAMSUNG-SM-G900A using Tapatalk Link to comment Share on other sites More sharing options...
Dr. Phil Posted June 12, 2018 Share Posted June 12, 2018 Lee U die for my 929 Link to comment Share on other sites More sharing options...
VanMan1961 Posted June 12, 2018 Share Posted June 12, 2018 Dillon worked fine, but I switched to Lee FC because I was getting some bullet creep. The 6th, 7th,. 8th round would sometimes creep .100". I was using very little crimp at first, and then down to .376. Still got bullet creep. I switched to the Lee FC die set at .378 crimp, and all is fine now. You may also want to get some loaded moon clip check gauges. I buy mine from Revolver Supply co, and run all my loaded moon clips through them before a match, and again before I run a stage. It helps eliminate any loading problems caused by a bent moon clip. Link to comment Share on other sites More sharing options...
Alaskapopo Posted June 12, 2018 Author Share Posted June 12, 2018 I have a loaded moon clip gauge and they dropped right in. Link to comment Share on other sites More sharing options...
MikeBurgess Posted June 13, 2018 Share Posted June 13, 2018 Will factory 9mm fit the cylinder?Also how was it converted? 38 super cylinder recut 357 cylinder recut?New custom cyclinder?The cylinder questions are more curiosity than anything. Sent from my SAMSUNG-SM-G935A using Tapatalk Link to comment Share on other sites More sharing options...
MWP Posted June 13, 2018 Share Posted June 13, 2018 I'm using a 38 super die, then 9mm. How the heck can it pass the chamber checker and fail the cylinder? If anything I've always seen it the other way around. Link to comment Share on other sites More sharing options...
PatJones Posted June 13, 2018 Share Posted June 13, 2018 Got a 627 converted to 9mm and my reloads won't chamber. They case gauged but no dice in the cylinder . What are you guys using to size your brass. Factory ammo fits fine. PatConverted? Ask your Gunsmith. Link to comment Share on other sites More sharing options...
GMM50 Posted June 13, 2018 Share Posted June 13, 2018 If factory ammo won't work I would suspect the conversion. Link to comment Share on other sites More sharing options...
mchapman Posted June 13, 2018 Share Posted June 13, 2018 Just for the hell of it what is your OAL? If too long it will cause that also. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now