M&P Trigger Bar

[GregInAtl]

Does anyone know if the trigger bar is the same for all M&P 9mm's. I have a M&P CORE 9mm w/5"barrel and I need to get a new trigger bar for it. I saw M&P trigger bars on Brownell's but they weren't specific to caliber or gun model. Do you know here I can get one, aside from S&W.

[Beef15]

Gen 1? All the same. Well there's like three, but production changes unrelated to caliber. Think H marked is latest. And it is supposed to be paired with the latest slide catch, the combination improves the reset feel.

 

G&R tactical had them when I needed one. S&W is funny about releasing parts for retail.

Edited June 2, 2018 by Beef15

[Avedis]

From what I understand, there has been three. Blank (no stamp), S stamped near trigger return spring hole, and H, also stamped near trigger return spring hole.

 

The H is the latest variation that I know of, The sear engagement loop or "candy cane" as people call it, has a more aggressive loop angle and subtle length changes. It engages sear sooner. It has slightly modified geometry so that contacts the slide stop for a more tactile "click" during reset. Here is a link to another thread with more info on the subject.

 

If you take your slide off, you'll easily be able to see the stamp on the trigger bar. You can go on Brownells or G&R Tactical and order the correct one. 

 

If you can't find what you need, shoot me a message, and i'll see if I have an extra I can sell you.

Edited June 3, 2018 by Avedis

[GregInAtl]

4 hours ago, Beef15 said:

Gen 1? All the same. Well there's like three, but production changes unrelated to caliber. Think H marked is latest. And it is supposed to be paired with the latest slide catch, the combination improves the reset feel.

 

G&R tactical had them when I needed one. S&W is funny about releasing parts for retail.

 

While other M&P models are 2.0, the CORE is still a 1.0