Mike21STI Posted April 27, 2018 Share Posted April 27, 2018 Has anyone had issues with an ejector pin that doesn't stay in securely? When i am breaking the gun dow to clean it, it slides out with no resistance at all Link to comment Share on other sites More sharing options...
Mushki25 Posted April 27, 2018 Share Posted April 27, 2018 My Svi will slide off if I try to remove it. I have not had a single issue and just assumed it’s fine as is. Link to comment Share on other sites More sharing options...
zzt Posted April 27, 2018 Share Posted April 27, 2018 Replace it with a new roll pin, or slightly oversized solid pin. Link to comment Share on other sites More sharing options...
Mike21STI Posted April 27, 2018 Author Share Posted April 27, 2018 Thanks, i didn't think it was a big issue since it can't fall off while its assembled. I might try to find a roll pin or an oversized pin though Link to comment Share on other sites More sharing options...
cheers623 Posted April 27, 2018 Share Posted April 27, 2018 The easy fix is to dribble a little blue loctite in the hole. Of course red works too...just a hassle to remove. Blue works fine though. Link to comment Share on other sites More sharing options...
cheers623 Posted April 27, 2018 Share Posted April 27, 2018 Oh, and is it a 2011 frame or 1911? They’re different size pins. 2011 is slightly larger and usually solid pin. Roll pins in 1911 frames. Link to comment Share on other sites More sharing options...
CHA-LEE Posted April 27, 2018 Share Posted April 27, 2018 For what its worth I have never used an ejector pin to retain the ejector. I have also never had an ejector fail or cause a problem due to it not being "Pinned". Link to comment Share on other sites More sharing options...
troupe Posted April 29, 2018 Share Posted April 29, 2018 Forget the pin Link to comment Share on other sites More sharing options...
Don_B Posted April 29, 2018 Share Posted April 29, 2018 On 4/27/2018 at 3:59 PM, CHA-LEE said: For what its worth I have never used an ejector pin to retain the ejector. I have also never had an ejector fail or cause a problem due to it not being "Pinned". That will work fine unless the ejector is loose in the holes then you may experience ejection problems. Link to comment Share on other sites More sharing options...
troupe Posted April 30, 2018 Share Posted April 30, 2018 Then fit another ejector that is tight. Link to comment Share on other sites More sharing options...
Don_B Posted April 30, 2018 Share Posted April 30, 2018 That is the answer. But you have to be aware of the problem. Link to comment Share on other sites More sharing options...
CHA-LEE Posted April 30, 2018 Share Posted April 30, 2018 Nobody likes loose holes...... Link to comment Share on other sites More sharing options...
Mike21STI Posted May 2, 2018 Author Share Posted May 2, 2018 On 4/29/2018 at 10:01 PM, CHA-LEE said: Nobody likes loose holes...... Lol... this^^^^^^^ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now