Jump to content
Brian Enos's Forums... Maku mozo!
Tnbb33

PCC red dot. Which one?

Recommended Posts

22 minutes ago, Ccryder53 said:

I’ve been using the Holosun 515c. I find it a great combination for many platforms. On the PC9 I use the the low mount and it allows great cheek weld. Even in bright light the dot-circle shows up for me.  YRMV.

Tough to beat for the quality and value that you get! 

Share this post


Link to post

I prefer the C-more slideride with 6 or 8 MOA dot on my PCC.

Share this post


Link to post
4 minutes ago, funflyr said:

I prefer the C-more slideride with 6 or 8 MOA dot on my PCC.

I removed the 8 MOA dot module and installed a 6 MOA dot module on my C more slide ride for my MPX. It turned out better for me.

Share this post


Link to post
On 2/22/2019 at 11:58 AM, TNREDNECK said:

Thx B Going to pull the trigger on the elite today, the only bad thing is I will have to end up buying 2 one for my AR 22 also . It never ends it’s probably good I don’t shoot pistols in competion also . Lol

 Any update?

Share this post


Link to post
On 4/14/2018 at 7:44 PM, Flatland Shooter said:

I've used the C-More Slideride and Railway sights for years.  I'd have to go to my safe to see how many polymer and aluminum C-Mores I have.  My first and only problem I've had with a C-more is an aluminum Railway I purchased that the screw  and plate used to attach the sight to the Weaver rail were stripped and I could not tighten them.  Called Cmore and had new parts at no cost in less than a week.

 

On my PCC I've bounced from 4MOA to 6MOA to 8MOA and back again.  For me size of dot is sometimes match dependent.

Since you have tried both what do you prefer the polymer or the Aluminum C-more i was looking at rebodying one and would love to hear if its worth the cost of the aluminum body.

Share this post


Link to post

I purchased an aluminum frame C-more to go on my Open class shotgun in 3-gun.  Not that much heavier than the standard polymer frame model.  My thoughts were it might hold up better on a 12 gauge that's getting tossed into a barrel.  I was not disappointed.  Replaced the polymer frame C-more on my 3-gun pistol for the same reason.

 

To replace the battery on the polymer C-more requires an allen wrench where the aluminum C-more uses thumb screws.   A nice feature.

 

I've tried to find thumb screws to use on the polymer frame but it uses an oddball coarse thread.

 

I've never needed to rebody a C-more but if the cost to upgrade to the aluminum body is not too high, I'd go that route.

Share this post


Link to post

Got a great price but it’s on back order so I am still waiting, can’t wait to get it and try it out .

Share this post


Link to post

I love the 510c. The option to change reticles and the huge window were the biggest selling point for me.


Sent from my iPhone using Tapatalk

Share this post


Link to post
Guest

I'm running a Holosun 510c main optic and a cheap NcStar side optic. Waiting to get ahold of a Holosun 507c to replace the NcStar

Share this post


Link to post

I had a holosun 503 green circle dot on my pcc. After reading this thread it inspired me to try the green 510c and pit the 503 on another gun.  I like the open window better so far

Share this post


Link to post

510c


Sent from my iPhone using Tapatalk

Share this post


Link to post

C-More Railway 8 MOA polymer. I shot the Florida Open with the 8 and did not have any sight issues for it being a technical match. The aluminum shroud around the glass is too thick for my liking, which is why I went the polymer route.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...