earthshine402 Posted April 5, 2018 Share Posted April 5, 2018 I have loaded over 40k total on my 650, and close to 20k in .40. Recently, I have been getting cases that were jammed up sliding into station 1, either getting hung up at the back of the "slide" or just popping out completely of the track. Has anyone else ever encountered this in any caliber, and if so, what was your fix? I noticed that the station 1 locator had wear on it and Dillon sent me a new part, but after replacing that part, I'm still experiencing the issue.. Link to comment Share on other sites More sharing options...
L3324temp Posted April 5, 2018 Share Posted April 5, 2018 One piece of corncob cob stick in the wrong spot can drive a person crazy.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
jhgtyre Posted April 6, 2018 Share Posted April 6, 2018 13 hours ago, L3324temp said: One piece of corncob cob stick in the wrong spot can drive a person crazy. Sent from my iPhone using Tapatalk I agree with L3324temp. I know that digital pics can make something that doesn't look all that dirty to the naked eye look really dirty but there does seem to be a good bit of cleaning media on the station one locator and a piece on the slide. A good scrubbing of the ramp and the slide might really be a good idea. Link to comment Share on other sites More sharing options...
Postal Bob Posted April 6, 2018 Share Posted April 6, 2018 You press is a mess with debris. Clean it up, and I think your problem will go away. Link to comment Share on other sites More sharing options...
Don_B Posted April 6, 2018 Share Posted April 6, 2018 While I agree about cleaning your press I used some needle files and flared or opened up the opening so the brass can enter the "slide" easier. Link to comment Share on other sites More sharing options...
earthshine402 Posted April 6, 2018 Author Share Posted April 6, 2018 I did clean up the station 1 locator and then replaced it all together. But I can't argue with you guys about how dirty the press is... I guess I'll clean it!Sent from my Pixel using Tapatalk Link to comment Share on other sites More sharing options...
jrb06 Posted April 6, 2018 Share Posted April 6, 2018 Make sure you put a dab of grease on the bottom of the locator slide where it sits in the tool head. It needs to stay put and not bounce around when the brass falls down on it. Just enough to make it stay put and not move around when the machine is operating but can float and move when a piece of brass is inserted. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now