reballz Posted March 28, 2018 Share Posted March 28, 2018 Trying to pick a forearm cover is kinda overwhelming. Looking at the Atlas S Any other recommendations? Do you prefer key-mod or M-Lok? Trying to keep well under $200I went with the atlas so I can’t blame you if that’s the route you tookSent from my iPhone using Tapatalk Link to comment
MikieM Posted March 28, 2018 Share Posted March 28, 2018 Since weight is always a consideration when putting a PCC together I would recommend the Taccom CF handguard. It only weighs 3 ounces (excluding the barrel nut). Kaw Valley has a CF handguard, as well as New Frontier. Link to comment
Snopczynski Posted March 28, 2018 Share Posted March 28, 2018 On a PCC I like super Light Weight. So I went with an ISLER CUSTOM GUN WORKS Carbon fiber hand guard. Link to comment
koteris Posted March 28, 2018 Share Posted March 28, 2018 I use the Atlas S-one hand guard, but it isn't light. Well, the hand guard is light, but their proprietary barrel nut is pretty heavy. Link to comment
reballz Posted March 28, 2018 Share Posted March 28, 2018 That’s what my rifle weighs with the optic. No mag. Sent from my iPhone using Tapatalk Link to comment
MikieM Posted March 28, 2018 Share Posted March 28, 2018 2 hours ago, Snopczynski said: On a PCC I like super Light Weight. So I went with an ISLER CUSTOM GUN WORKS Carbon fiber hand guard. Can you provide a picture? I've heard about those but have never seen one. Thanks, Mike Link to comment
HoMiE Posted March 28, 2018 Share Posted March 28, 2018 2 minutes ago, MikieM said: Can you provide a picture? I've heard about those but have never seen one. Thanks, Mike https://www.islercustomgunworks.com/custom-parts/ Link to comment
Piracy85 Posted March 30, 2018 Share Posted March 30, 2018 The isler Custom gunworks carbon fiber handguard is hard to beat, if i didn't go with the Aero S-One i would of gone with Isler. Myabe on the next one.... Link to comment
Piracy85 Posted March 30, 2018 Share Posted March 30, 2018 3 hours ago, Snopczynski said: Oh so pretty, Would look better in tungsten grey... Link to comment
Startingover Posted March 31, 2018 Author Share Posted March 31, 2018 Nice stuff, but a little more than I wanted to spend. I did get to check out the Jones Arms piece today. Nice stuff, but I don't think I want the rail all the way down. This is all starting to add up pretty quickly, to be a little more than I wanted to spend. I am trying to keep it under $2000 Link to comment
Snopczynski Posted March 31, 2018 Share Posted March 31, 2018 Nice stuff, but a little more than I wanted to spend. I did get to check out the Jones Arms piece today. Nice stuff, but I don't think I want the rail all the way down. This is all starting to add up pretty quickly, to be a little more than I wanted to spend. I am trying to keep it under $2000 Jones Arms had you covered this whole time my friendSent from my iPhone using Tapatalk Link to comment
Snopczynski Posted March 31, 2018 Share Posted March 31, 2018 Sent from my iPhone using Tapatalk Link to comment
Snopczynski Posted March 31, 2018 Share Posted March 31, 2018 Sent from my iPhone using Tapatalk Link to comment
Snopczynski Posted March 31, 2018 Share Posted March 31, 2018 Sent from my iPhone using Tapatalk Link to comment
Startingover Posted March 31, 2018 Author Share Posted March 31, 2018 Those look a little different than what Kevin showed me today. The Atlas S is a little bit cheaper also, not much, but every little bit. Link to comment
Startingover Posted March 31, 2018 Author Share Posted March 31, 2018 I did like how they attach, looked like it would be soild. Do you know if the one with the rail section removed going to be a standard offering? Link to comment
Startingover Posted April 1, 2018 Author Share Posted April 1, 2018 Pretty excited, I am finally starting to order and collect parts for this Kronos build. Here is what I have, or have on the way. Hopefully I am heading in the right direction Jones Arms Kronos upper and lower CMMG 16" barrel Fortis muzzle brake Elftman AR9 flat trigger Faxon gen2 BCG Blitzkrieg hyd buffer (carbine spring) Aero Precision Atlas S One (15" M-Lok) handguard Cheapest low bid (USA made) Furniture Link to comment
reballz Posted April 1, 2018 Share Posted April 1, 2018 Pretty excited, I am finally starting to order and collect parts for this Kronos build. Here is what I have, or have on the way. Hopefully I am heading in the right direction [emoji6] Jones Arms Kronos upper and lower CMMG 16" barrel Fortis muzzle brake Elftman AR9 flat trigger Faxon gen2 BCG Blitzkrieg hyd buffer (carbine spring) Aero Precision Atlas S One (15" M-Lok) handguard Cheapest low bid (USA made) Furniture I had the fortis brake. I was not happy with it and sold it immediately. Full sail brake is the way to go. Sent from my iPhone using Tapatalk Link to comment
Startingover Posted April 1, 2018 Author Share Posted April 1, 2018 1 hour ago, reballz said: I had the fortis brake. I was not happy with it and sold it immediately. Full sail brake is the way to go. Sent from my iPhone using Tapatalk I was going to go with Epsilon VG6, but the CMMG barrel I am using is 1/2-36 (Got a super deal on it from 777 Tactical) So I am limited on available brakes. Link to comment
reballz Posted April 1, 2018 Share Posted April 1, 2018 I was going to go with Epsilon VG6, but the CMMG barrel I am using is 1/2-36 (Got a super deal on it from 777 Tactical) So I am limited on available brakes.Shooting innovations does a 1/2-36. They may not have it on the site. Just call them. Sent from my iPhone using Tapatalk Link to comment
Startingover Posted April 5, 2018 Author Share Posted April 5, 2018 (edited) Now I am looking at charging handles, any recommendations or stuff I should stay away from? Will the "latchless" style work? Edited April 5, 2018 by Startingover Link to comment
MikieM Posted April 5, 2018 Share Posted April 5, 2018 Take a look at the SI ISO Tabb. Looks pretty good and the price is right, Link to comment
Startingover Posted April 6, 2018 Author Share Posted April 6, 2018 23 hours ago, MikieM said: Take a look at the SI ISO Tabb. Looks pretty good and the price is right, Thanks for the info, but I can't seem to find it. (I may be looking in the wrong place) Is "SI" Strike industry? Link to comment
MikieM Posted April 6, 2018 Share Posted April 6, 2018 1 hour ago, Startingover said: Thanks for the info, but I can't seem to find it. (I may be looking in the wrong place) Is "SI" Strike industry? Yes it is. I Googled latchless AR15 charge handles and it showed up. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now