Showclear Posted March 14, 2018 Share Posted March 14, 2018 Who would be the best source for a carbide throating reamer for a 9mm barrel? I have a Manson reamer now that works well for standard steels but it just won't cut the harder surface treated chrome,melonite or nitrided barrels. Looking for a solution.. Link to comment
1911luvr Posted March 15, 2018 Share Posted March 15, 2018 I have special carbide reamers made by a local tool and die company for throating 9mm barrels. Mine are similar to the Clymer throat reamers but obviously cut much better. Message me if you are interested. Sent from my iPhone using Tapatalk Link to comment
Flatland Shooter Posted March 15, 2018 Share Posted March 15, 2018 1911luvr throated a nitride coated barrel for me a while back and did a good job. I'm very happy with the results. That barrel can now handle any bullet, jacketed, plated or coated, that I wish to use. The toughest is 160 gr Ibejihead bullets loaded to 1.160" OAL. Link to comment
Piracy85 Posted March 21, 2018 Share Posted March 21, 2018 Before you throat a barrel make sure the real problem isn’t a long chamber. I recently had that issue with a 9mm barrel. Link to comment
Showclear Posted March 21, 2018 Author Share Posted March 21, 2018 A long chamber is not the case in this particular barrel. Thanks Link to comment
Showclear Posted March 22, 2018 Author Share Posted March 22, 2018 I ended up buying a carbide reamer from 1911luvr. Used it on my problem child barrel. It worked better than I thought possible on that hard metal. Very happy with the results. Link to comment
johnsilver Posted February 14, 2019 Share Posted February 14, 2019 On 3/14/2018 at 9:24 PM, 1911luvr said: I have special carbide reamers made by a local tool and die company for throating 9mm barrels. Mine are similar to the Clymer throat reamers but obviously cut much better. Message me if you are interested. Sent from my iPhone using Tapatalk How may I contact you? I need a reamer. Link to comment
1911luvr Posted February 14, 2019 Share Posted February 14, 2019 Send me a PM and I’ll be happy to help!Sent from my iPhone using Tapatalk Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now