Jump to content
Brian Enos's Forums... Maku mozo!
Smeeg

Dillon case prep machine CP-2000

Recommended Posts

Hoping it has a low MSRP for the 650 guys otherwise I don’t see the point 

D62C9CB5-053A-4206-BD56-FEB33EEE5262.jpeg

Edited by Smeeg

Share this post


Link to post
Share on other sites

 No primer system on it,  it will be straight processing.  With the large crank counterweight looks a little bit like an RL 1050   You would think the price would be less than half of the super 1050

pic is from the shot show 

 

7A8B3806-4D6E-458E-8F64-40C89219E88C.png

Edited by tmz

Share this post


Link to post
Share on other sites

 Here’s the new case feeder that comes on It. 

6238A8A7-B296-449E-9558-CEA2E718078C.jpeg

9609B2D1-CBC4-4F4A-AD28-6EDE1AD0D29A.jpeg

Share this post


Link to post
Share on other sites

Nothing Dillon makes is cheap, but then again, It's a Dillon and well worth the price for guys looking to process high volumes of brass.  Personally, I'll still use my XL650 and Rt1500

Share this post


Link to post
Share on other sites

I’d buy one at half of the 1050 price. Maybe can get it without casefeeder and drop it down even more. I just want it to swage. I’ll do everything else on the mark 7 650.


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Looks like the new case feeder is for sale now. Looking at the May Blue Press. Still don’t see anything on the CP-2000, website or paperback. 

Share this post


Link to post
Share on other sites

Yeah I’d totslly buy a. Case prep machine but it’s gotts come in at the right price point

Share this post


Link to post
Share on other sites

Anyone heard any update? Still see nothing on the D website.

Sent from my SM-G930P using Tapatalk

Share this post


Link to post
Share on other sites

I asked a guy that I shoot with, that works at Dillon, only thing he told me is that the R&D dept still has it under wraps. I inquired on a price point, he didn’t know, but sounds like it might not be an attractive price.


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

If it is based on the 1050 platform, I’d speculate that it will be the same price range as a 1050 along with a similar warranty as the 1050.  

 

I hope that that it is structured like the 550 basic compared to the full 550C

Share this post


Link to post
Share on other sites
Has anyone heard anymore on this?
I talked to a Dillion rep at the SAR show. He said the machine should be ready in January.

Sent from my SM-G930P using Tapatalk

Share this post


Link to post
Share on other sites

I called and spoke with Dillon a month or so ago got about the same information but also they said it would be roughly the same price as a super 1050 couldn’t understand that part  so I just went ahead and picked up another 1050  made my own set up along with the case  counter. 

 

 

Share this post


Link to post
Share on other sites

I wondered what happened to this machine. Not sure why it would come in at the same price as the 1050. I feel like people would just buy a 1050 and still have the option to load. Although I did hear there were slight machine changes. 

Edited by anbrumm

Share this post


Link to post
Share on other sites

Odd that it was introduced in January 2018 (with an expected release date of Spring 2018) and here we are on the verge of January 2019 and can't even get a firm price...

Wonder what went wrong?


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
1 hour ago, Want2BS8ed said:

Odd that it was introduced in January 2018 (with an expected release date of Spring 2018) and here we are on the verge of January 2019 and can't even get a firm price...

Wonder what went wrong?


Sent from my iPhone using Tapatalk

That's what I wondered. Some said it was built off the RL1050 cam system (just going off what people said, I do not know this), and that it used a special tool head. I can see the tool head thing being a problem as people who would be getting these likely already have 1050 toolheads they use for processing. Maybe that factored into it.

Share this post


Link to post
Share on other sites

Finally looks like the Case Prep 2000 will be ready this coming Spring.  Ammobot (and probably others) are selling auto drives now.

Share this post


Link to post
Share on other sites

From the other thread where Ltdmstr mentioned: "Price they gave me on the cp is 1549 w/o the trimmer. RL 1100 is 2k."

Share this post


Link to post
Share on other sites
On 4/13/2018 at 6:03 PM, rmckinle said:

Looks like the new case feeder is for sale now. Looking at the May Blue Press. Still don’t see anything on the CP-2000, website or paperback. 

I realize this is 9 months old, but can you please tell me what page of the May Blue Press it appears on?  I've scoured mine and can't find it.

 

Thank You.

Share this post


Link to post
Share on other sites
I realize this is 9 months old, but can you please tell me what page of the May Blue Press it appears on?  I've scoured mine and can't find it.
 
Thank You.
Apparently not "officially" announced yet. I called Dillon last week. The salesman told me the CP should be launched in a couple months.

Sent from my SM-G930P using Tapatalk

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...