Smeeg Posted January 24, 2018 Share Posted January 24, 2018 (edited) Hoping it has a low MSRP for the 650 guys otherwise I don’t see the point Edited January 24, 2018 by Smeeg Link to comment Share on other sites More sharing options...
michael.flitcraft Posted January 24, 2018 Share Posted January 24, 2018 Looks like a sister to a 1050. It says commercial grade, doubt it will be 650 priced.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
tmz Posted January 24, 2018 Share Posted January 24, 2018 (edited) No primer system on it, it will be straight processing. With the large crank counterweight looks a little bit like an RL 1050 You would think the price would be less than half of the super 1050 pic is from the shot show Edited January 24, 2018 by tmz Link to comment Share on other sites More sharing options...
tmz Posted January 24, 2018 Share Posted January 24, 2018 Here’s the new case feeder that comes on It. Link to comment Share on other sites More sharing options...
stick Posted January 24, 2018 Share Posted January 24, 2018 Nothing Dillon makes is cheap, but then again, It's a Dillon and well worth the price for guys looking to process high volumes of brass. Personally, I'll still use my XL650 and Rt1500 Link to comment Share on other sites More sharing options...
camaross400 Posted January 24, 2018 Share Posted January 24, 2018 What’s the price?Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
cvincent Posted January 24, 2018 Share Posted January 24, 2018 I’d buy one at half of the 1050 price. Maybe can get it without casefeeder and drop it down even more. I just want it to swage. I’ll do everything else on the mark 7 650. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
rmckinle Posted April 13, 2018 Share Posted April 13, 2018 Looks like the new case feeder is for sale now. Looking at the May Blue Press. Still don’t see anything on the CP-2000, website or paperback. Link to comment Share on other sites More sharing options...
Nathanb Posted April 13, 2018 Share Posted April 13, 2018 Yeah I’d totslly buy a. Case prep machine but it’s gotts come in at the right price point Link to comment Share on other sites More sharing options...
JatCarver Posted April 15, 2018 Share Posted April 15, 2018 I want just the plastic piece inside the casefeeder that they added! Link to comment Share on other sites More sharing options...
Tokarev Posted July 5, 2018 Share Posted July 5, 2018 Anyone heard any update? Still see nothing on the D website. Sent from my SM-G930P using Tapatalk Link to comment Share on other sites More sharing options...
cvincent Posted July 6, 2018 Share Posted July 6, 2018 I asked a guy that I shoot with, that works at Dillon, only thing he told me is that the R&D dept still has it under wraps. I inquired on a price point, he didn’t know, but sounds like it might not be an attractive price. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Currently Posted July 6, 2018 Share Posted July 6, 2018 If it is based on the 1050 platform, I’d speculate that it will be the same price range as a 1050 along with a similar warranty as the 1050. I hope that that it is structured like the 550 basic compared to the full 550C Link to comment Share on other sites More sharing options...
Riley Posted December 16, 2018 Share Posted December 16, 2018 Has anyone heard anymore on this? Link to comment Share on other sites More sharing options...
Tokarev Posted December 16, 2018 Share Posted December 16, 2018 Has anyone heard anymore on this?I talked to a Dillion rep at the SAR show. He said the machine should be ready in January.Sent from my SM-G930P using Tapatalk Link to comment Share on other sites More sharing options...
tmz Posted December 16, 2018 Share Posted December 16, 2018 I called and spoke with Dillon a month or so ago got about the same information but also they said it would be roughly the same price as a super 1050 couldn’t understand that part so I just went ahead and picked up another 1050 made my own set up along with the case counter. Link to comment Share on other sites More sharing options...
anbrumm Posted December 17, 2018 Share Posted December 17, 2018 (edited) I wondered what happened to this machine. Not sure why it would come in at the same price as the 1050. I feel like people would just buy a 1050 and still have the option to load. Although I did hear there were slight machine changes. Edited December 17, 2018 by anbrumm Link to comment Share on other sites More sharing options...
Want2BS8ed Posted December 31, 2018 Share Posted December 31, 2018 Odd that it was introduced in January 2018 (with an expected release date of Spring 2018) and here we are on the verge of January 2019 and can't even get a firm price...Wonder what went wrong?Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
anbrumm Posted December 31, 2018 Share Posted December 31, 2018 1 hour ago, Want2BS8ed said: Odd that it was introduced in January 2018 (with an expected release date of Spring 2018) and here we are on the verge of January 2019 and can't even get a firm price... Wonder what went wrong? Sent from my iPhone using Tapatalk That's what I wondered. Some said it was built off the RL1050 cam system (just going off what people said, I do not know this), and that it used a special tool head. I can see the tool head thing being a problem as people who would be getting these likely already have 1050 toolheads they use for processing. Maybe that factored into it. Link to comment Share on other sites More sharing options...
Tokarev Posted January 26, 2019 Share Posted January 26, 2019 Finally looks like the Case Prep 2000 will be ready this coming Spring. Ammobot (and probably others) are selling auto drives now. Link to comment Share on other sites More sharing options...
teros135 Posted January 26, 2019 Share Posted January 26, 2019 I seem to remember the price is around $1500 Link to comment Share on other sites More sharing options...
RGA Posted January 26, 2019 Share Posted January 26, 2019 From the other thread where Ltdmstr mentioned: "Price they gave me on the cp is 1549 w/o the trimmer. RL 1100 is 2k." Link to comment Share on other sites More sharing options...
iflyskyhigh Posted January 26, 2019 Share Posted January 26, 2019 What’s new with the RL1100?Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
flutedchamber Posted January 27, 2019 Share Posted January 27, 2019 On 4/13/2018 at 6:03 PM, rmckinle said: Looks like the new case feeder is for sale now. Looking at the May Blue Press. Still don’t see anything on the CP-2000, website or paperback. I realize this is 9 months old, but can you please tell me what page of the May Blue Press it appears on? I've scoured mine and can't find it. Thank You. Link to comment Share on other sites More sharing options...
Tokarev Posted February 19, 2019 Share Posted February 19, 2019 I realize this is 9 months old, but can you please tell me what page of the May Blue Press it appears on? I've scoured mine and can't find it. Thank You.Apparently not "officially" announced yet. I called Dillon last week. The salesman told me the CP should be launched in a couple months. Sent from my SM-G930P using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now