Jump to content
Brian Enos's Forums... Maku mozo!

Cmore c3 question


Recommended Posts

What is everyone using for a throw lever on this scope? I have one coming and would like to add one. Also mounts. I have a p.e.p.r mount and an American defense mount. Obviously the ADM is higher quality but it seems to sit way lower and i have to get my head in a seriously awkward angle to get a sight picture. It’s quick detach also so not sure if that’s a plus or minus. I may have to buy another mount but don’t want to waste anymore money on a low pro or anything. Thanks in advance!

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

I'm using an MK Machine throw lever for the Sig Tango 6 scope, with a slightly longer screw. I managed to destroy the first one but Tyler at MK agreed to make me a beefed up unit for a little extra money.

Nice. Do I find them with a google search??


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Yup. If you order one ask in the order notes box if you can get the same set up for a C3 that Anthony Dietmeier purchased. Tyler will probably contact you before shipping it, and he'll remember my recent purchase. http://mkmachining.com/product/sig-tango6-throw-lever/

I just noticed he's making aluminum levers also, might be worth looking into.

Edited by TonytheTiger
Link to comment
Share on other sites

Yup. If you order one ask in the order notes box if you can get the same set up for a C3 that Anthony Dietmeier purchased. Tyler will probably contact you before shipping it, and he'll remember my recent purchase. http://mkmachining.com/product/sig-tango6-throw-lever/
I just noticed he's making aluminum levers also, might be worth looking into.

Awesome! Once again THANK YOU TONY!!


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

I emailed mgmswitchview and received the following in case anyone else was wondering which one would fit. 

 

The best fitting lever for the C-3 would be our 1966SV. However, there will be an unfilled notch in the lever, but will not affect the function of the lever.

Link to comment
Share on other sites

[emoji106]

Tony, what kind of mount do you recommend? I was looking at the warne mounts but they have several. I don’t want a “low profile” mount. I want one that when I place my face on my stock it’s there. Thanks!


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

22 minutes ago, TonytheTiger said:

Sounds like you might be looking for a high mount.

https://www.americandefensemanufacturing.com/view/product/188/

 

https://www.larue.com/products/larue-tactical-spr-m4-1-93-mount-qd-lt135/

 

Those are the first two that come to mind.

I have the opposite problem, I have to use a cheek riser because they don’t make a mount low enough.

Link to comment
Share on other sites

I ended up going with the bobro extended mount single throw lever. They seemed to have really good reviews. I went with a qd mount due to taking it off to clean when I need to and not worrying about zero. Also, I “heard” that the Larue mounts were chewing peoples rails up? Not sure how true this is, and it’s not a safe queen but I don’t want it chewed up either. [emoji1303]


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

I have a Rock River Arms Scout rail that cantilevers WAY out over the handguard. Then i put a set of Warne rings on it. You can get what ever height rings you want. I use the medium, I think they are 1.5" high. It is a very solid setup, but heavy, and is not QD.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...