IHAVEGAS Posted November 22, 2017 Share Posted November 22, 2017 40 minutes ago, B_RAD said: My buddy is selling his S2 .40. Tell him he needs one of these instead. Link to comment Share on other sites More sharing options...
Leohe8888 Posted November 22, 2017 Author Share Posted November 22, 2017 1 hour ago, B_RAD said: My buddy is selling his S2 .40. Thanks ,but i only interest to 9mm , Link to comment Share on other sites More sharing options...
Avenida Posted November 23, 2017 Share Posted November 23, 2017 7 hours ago, IHAVEGAS said: 100% titegroup, I clean the extractor every great once in a while (annual cleaning or the mood strikes me or whatever) . There is always crud in and around the extractor but it does not seem to make any difference, seems like it quickly builds up to a certain level of crud & then just stays that way. correct, titegroup is the powder I have been using and I would not recommend for shooting volume with this gun unless you clean it often. at 500 rounds it started failing to extract. Cleaned the gun and everything back to normal. Link to comment Share on other sites More sharing options...
Leohe8888 Posted November 23, 2017 Author Share Posted November 23, 2017 3 minutes ago, Avenida said: correct, titegroup is the powder I have been using and I would not recommend for shooting volume with this gun unless you clean it often. at 500 rounds it started failing to extract. Cleaned the gun and everything back to normal. I use factory ammos and always clean it when i shoot whatever how many rounds i shoot Link to comment Share on other sites More sharing options...
Leohe8888 Posted November 23, 2017 Author Share Posted November 23, 2017 (edited) I try both guns felt they are same ,maybe get a shadow2 for backup lol Edited November 24, 2017 by Leohe8888 Link to comment Share on other sites More sharing options...
IHAVEGAS Posted November 23, 2017 Share Posted November 23, 2017 9 hours ago, Avenida said: correct, titegroup is the powder I have been using and I would not recommend for shooting volume with this gun unless you clean it often. at 500 rounds it started failing to extract. Cleaned the gun and everything back to normal. Never had a failure to extract, shoot only titegroup & shoot around 2000 rounds per month during the summer. Have purchased a couple extra power extractor springs on advice but so far not installed them. I know I have cleaned around the extractor once in the last 6-7000 rounds and I think I have done it twice, could not tell any difference in how the gun works. Usually do a basic clean (barrel, slide) about every 1000 rounds or so, but I have been lazy before and pushed that a bit with no noticeable effect. I'm guessing that widely varied tolerances in Tanfo's might be the reason why some of them seem to be more or less fussy about certain things. Noticed with my 2 stock 2's this week that their firing pins were made significantly differently, apparently they have more than one 3rd party supplier, could be something like that going on with extractors as well. Mirror polishing the extractor and extractor channel might possibly have helped my gun I suppose, I did all of that before shooting so no way to know if it made any difference. Link to comment Share on other sites More sharing options...
bulm540 Posted November 23, 2017 Share Posted November 23, 2017 (edited) 40 minutes ago, IHAVEGAS said: Never had a failure to extract, shoot only titegroup & shoot around 2000 rounds per month during the summer. Have purchased a couple extra power extractor springs on advice but so far not installed them. I know I have cleaned around the extractor once in the last 6-7000 rounds and I think I have done it twice, could not tell any difference in how the gun works. Usually do a basic clean (barrel, slide) about every 1000 rounds or so, but I have been lazy before and pushed that a bit with no noticeable effect. I'm guessing that widely varied tolerances in Tanfo's might be the reason why some of them seem to be more or less fussy about certain things. Noticed with my 2 stock 2's this week that their firing pins were made significantly differently, apparently they have more than one 3rd party supplier, could be something like that going on with extractors as well. Mirror polishing the extractor and extractor channel might possibly have helped my gun I suppose, I did all of that before shooting so no way to know if it made any difference. Same here, going on 13 k with tg with no extraction problems but I shoot a 40 cal. I have recently switched to wst which is so much cleaner and softer than titegroup. Edited November 23, 2017 by bulm540 Link to comment Share on other sites More sharing options...
Leohe8888 Posted November 24, 2017 Author Share Posted November 24, 2017 On 2017/11/12 at 12:27 PM, johnbu said: Or maybe Friday after a too much vino at lunch? Hello sir ,do you know is that 9mm stock2 can use .40S&W magazine ? I just make sure everything is safe when i dry fire . Thanks ! Link to comment Share on other sites More sharing options...
Leohe8888 Posted November 24, 2017 Author Share Posted November 24, 2017 (edited) cellphone broken ,sorry, Edited November 24, 2017 by Leohe8888 Link to comment Share on other sites More sharing options...
Leohe8888 Posted November 24, 2017 Author Share Posted November 24, 2017 (edited) cellphone broken ,sorry Edited November 24, 2017 by Leohe8888 mobile problem Link to comment Share on other sites More sharing options...
Leohe8888 Posted November 24, 2017 Author Share Posted November 24, 2017 (edited) mobile broken ,sorry Edited November 24, 2017 by Leohe8888 mobile problem Link to comment Share on other sites More sharing options...
yigal Posted November 24, 2017 Share Posted November 24, 2017 8 hours ago, Leohe8888 said: cellphone broken ,sorry, 8 hours ago, Leohe8888 said: mobile broken ,sorry did u shoot them? Link to comment Share on other sites More sharing options...
Leohe8888 Posted November 24, 2017 Author Share Posted November 24, 2017 8 hours ago, yigal said: did u shoot them? My phone is broken ,need change a new phone frist . sorry Link to comment Share on other sites More sharing options...
johnbu Posted November 25, 2017 Share Posted November 25, 2017 On 11/24/2017 at 1:13 AM, Leohe8888 said: Hello sir ,do you know is that 9mm stock2 can use .40S&W magazine ? I just make sure everything is safe when i dry fire . Thanks ! The 40 mag will fit if they are both the same frame size. In USA, 99% of the guns are large frame. In other places, they are predominately small frame. BUT ! 9mm rounds will not be held in the 40sw mag as the lips are typically too wide. So, they will fit, but won't be usable to shoot. Link to comment Share on other sites More sharing options...
Leohe8888 Posted November 25, 2017 Author Share Posted November 25, 2017 5 hours ago, johnbu said: The 40 mag will fit if they are both the same frame size. In USA, 99% of the guns are large frame. In other places, they are predominately small frame. BUT ! 9mm rounds will not be held in the 40sw mag as the lips are typically too wide. So, they will fit, but won't be usable to shoot. I try to use .40S&W ammos and magazines for dry fire ,more safety ? Link to comment Share on other sites More sharing options...
MissionaryMike Posted November 25, 2017 Share Posted November 25, 2017 On 11/22/2017 at 9:55 PM, Leohe8888 said: I try both guns felt they are same ,maybe get a shadow2 for backup lol So you’re getting both guns? Awesome! Link to comment Share on other sites More sharing options...
Leohe8888 Posted November 25, 2017 Author Share Posted November 25, 2017 2 hours ago, MissionaryMike said: So you’re getting both guns? Awesome! I bought a brand new stock2 from my friend and he help me change alot stuffs. Not get shadow2 yet,nomore budget rightnow ,need save money ? Link to comment Share on other sites More sharing options...
bulm540 Posted November 26, 2017 Share Posted November 26, 2017 1 hour ago, Leohe8888 said: I bought a brand new stock2 from my friend and he help me change alot stuffs. Not get shadow2 yet,nomore budget rightnow ,need save money ? get another stock 2 when your finances allow. My back up gun before I got the second stock 2 was a glock 35 and it was a bear to carry different gear in another bag. Link to comment Share on other sites More sharing options...
Leohe8888 Posted November 26, 2017 Author Share Posted November 26, 2017 12 hours ago, bulm540 said: get another stock 2 when your finances allow. My back up gun before I got the second stock 2 was a glock 35 and it was a bear to carry different gear in another bag. Yes ,my friend told me same thing,I am looking for stock2 rightnow Link to comment Share on other sites More sharing options...
Fasthenk65 Posted April 28, 2018 Share Posted April 28, 2018 On 11/15/2017 at 5:53 AM, yigal said: da very smooth and breaks clean all the way. feels lite .very impressive . compared to sh2 SA is the same . but compared to cz tso is far Yigal was this the Stock 3??? Link to comment Share on other sites More sharing options...
PatGarrett Posted April 28, 2018 Share Posted April 28, 2018 On 11/12/2017 at 11:27 AM, yigal said: the difference that stock 2 will live more than shadow2. in ours shooting club 4 shadow 2 have frame breakage after 10k factory ammo . and old tan lim pro small frame with bull barrel still shoot after 40k with the same ammo. shadow2 maybe better quality ,more reliable and pleasant to shoot but i prefer tan. that made from real good steel. than sh2 that made from recycled car and tan. small frame (i think it better than large frame) i see it as good base to start make it much better. CZ 75 SP-01 Shadow is proven and have few problems and i like that better than the shadow2. The slide stop pin of the CZ-75 need to be changed after some time on all the CZ and it´s clones. I´m still running my Jericho and just a few problems after more than 50k rounds Link to comment Share on other sites More sharing options...
Avenida Posted May 4, 2018 Share Posted May 4, 2018 On 11/22/2017 at 9:39 PM, Avenida said: correct, titegroup is the powder I have been using and I would not recommend for shooting volume with this gun unless you clean it often. at 500 rounds it started failing to extract. Cleaned the gun and everything back to normal. just wanted to add to this, that this was happening when using tango stock extractor spring. Ever since I switched to a XP spring (WOLFF), no more issues and no need to baby the gun. Link to comment Share on other sites More sharing options...
johnbu Posted May 4, 2018 Share Posted May 4, 2018 1 hour ago, Avenida said: just wanted to add to this, that this was happening when using tango stock extractor spring. Ever since I switched to a XP spring (WOLFF), no more issues and no need to baby the gun. Yeah, mine is a crud factory and doesn't bobble at all. But, i think when these last 3-4 lb of TG are gone, ill switch powders. Link to comment Share on other sites More sharing options...
Avenida Posted May 5, 2018 Share Posted May 5, 2018 20 hours ago, johnbu said: Yeah, mine is a crud factory and doesn't bobble at all. But, i think when these last 3-4 lb of TG are gone, ill switch powders. 8lbs to go over here! just bought 4lbs of V320 Link to comment Share on other sites More sharing options...
DClass Posted June 3, 2018 Share Posted June 3, 2018 Both are great guns can’t go wrong with either comes down to personal prefrance and personally I personally I prefer the Stock II Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now