Jump to content
Brian Enos's Forums... Maku mozo!
Sign in to follow this  
SinistralRifleman

NEW SLT-1 Trigger

Recommended Posts

KE Arms is pleased to announce the release of the SLT-1 Sear Link Technology Trigger.

KE Arms has licensed the manufacturing and distribution rights for the patent pending Sear Link Technology trigger system from M&M Manufacturing.  All components are made and assembled in the USA.

 

The SLT-1 has been tested thoroughly before release with tens of thousands of rounds in traditional 5.56 AR platforms, .308 AR platforms, 9mm AR pattern blow back carbines, and the SIG MPX

 

TRIGGER FEATURES

-4.5 POUND TRIGGER PULL

- MINIMAL TAKEUP AND OVERTRAVEL

- ULTRA-CRISP BREAK

- DRASTICALLY REDUCED SPLIT TIMES

- SIMPLE DROP IN INSTALLATION

 

EFFICIENT ENERGY TRANSFER

- There is no disconnector for the hammer to drive through, thus creating a more efficient cycle of the bolt simply pushing the hammer out of the way as the gun fires.

- Forces of the bolt on the hammer are not transmitted into any other components of the trigger assembly.

- Constant sear engagement against the hammer means the trigger is always ready to reset and fire

 

IMPROVED RELIABILITY

Moving parts are sealed in the underside of the housing making it less susceptible to fouling and debris.

 

IMPROVED LONGEVITY

No impact on moving internal parts increases longevity of the trigger system.

 

INSTALLATION 
The SLT-1 Drops into mil-spec fire control pockets and is retained with standard fire control pins captured by springs inside the housing bushings.

 

IMPROVED SAFETY

Due to the unique geometry of the trigger, the safety can always be applied regardless of the hammer being down or cocked. When used appropriately this adds another level of safety to administrative handling and clearing of malfunctions.

 

Ambi Selector Included for a Limited Time
For a limited time KE Arms Ambi-Selectors will be included with all orders direct from KE Arms. If you purchase an SLT-1 from an authorized retailer during this time, you will receive a voucher for a free ambi-selector in the package.

 

Introductory MSRP of $199.95

 

Order online at http://www.kearms.com/slt-1-sear-link-technology-trigger.aspx

 

For Sales inquiries e-mail sales@kearms.com
For Media inquiries e-mail Russell@kearms.com

ps_IMG_2053-cropedit.jpg

Share this post


Link to post
Share on other sites

Very interesting. Got an exploded view or cutaway picture to help us common folk understand it?

Share this post


Link to post
Share on other sites
36 minutes ago, TonytheTiger said:

Very interesting. Got an exploded view or cutaway picture to help us common folk understand it?

 

Share this post


Link to post
Share on other sites

I shot 5000 rounds in testing on an MPX.  I stopped shooting the MPX when we came out with our own 9mm Glock mag lowers.  

 

Since release we have improved the SLT triggers to further improve durability and reliability in the MPX.  Everything manufactured since November 2017 includes these improvements.  These improvements include heat treating all the parts rather than just the hammer, and adding a return spring under the sear.

 

Since these improvements we've had 2 returns for use in MPX; they were full of unburned powder and carbon; there was no wear on the parts or breakage.  Simply cleaning them made them operational again.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...