Superpipe9 Posted February 21, 2017 Share Posted February 21, 2017 Bullet, powder, OAL, etc... Link to comment Share on other sites More sharing options...
harleytech Posted February 21, 2017 Share Posted February 21, 2017 180 gr Blue Bullet, 4.4 gr 320, 1.125" OAL. Chrono'ed at the Florida Open at 170.8 PF. Link to comment Share on other sites More sharing options...
zzt Posted February 21, 2017 Share Posted February 21, 2017 For USPSA Limited- 180 over 3.7gr Alliant e3 at 1.126" OAL for 172 PF. For Steel Challenge- 135gr Rainier over 3.3gr e3 at 1.126" OAL for 109PF For Open (separate upper) Major-155gr Rainier over 7.2gr Silhouette at 1.126" for 172PF or same with 8.3gr HS-6. Open Minor: Rainier 155gr over 3.3gr e3 at 1.126" OAL for 131PF Link to comment Share on other sites More sharing options...
phoenixsomd Posted February 22, 2017 Share Posted February 22, 2017 For USPSA Limited- 180 over 3.7gr Alliant e3 at 1.126" OAL for 172 PF. For Steel Challenge- 135gr Rainier over 3.3gr e3 at 1.126" OAL for 109PF For Open (separate upper) Major-155gr Rainier over 7.2gr Silhouette at 1.126" for 172PF or same with 8.3gr HS-6. Open Minor: Rainier 155gr over 3.3gr e3 at 1.126" OAL for 131PFYour first load is my current go-toSent from my SM-G935V using Tapatalk Link to comment Share on other sites More sharing options...
IHAVEGAS Posted February 22, 2017 Share Posted February 22, 2017 Why so short? Link to comment Share on other sites More sharing options...
Bullets Posted February 22, 2017 Share Posted February 22, 2017 5 minutes ago, IHAVEGAS said: Why so short? The czs have short chambers can't load them long. I like 4.5 n320 with BBI 180. 1.120. 172pf Link to comment Share on other sites More sharing options...
IHAVEGAS Posted February 22, 2017 Share Posted February 22, 2017 Just now, Bullets said: The czs have short chambers can't load them long. I like 4.5 n320 with BBI 180. 1.120. 172pf Learning, new gun & have not worked up something yet. Mine seems to pluck test at about 1.16 with Bayou 180 rnfp & the loads I had for a different gun (1.15 - 1.155) seem to work fine. That is not to say that perhaps 1.12 may not be a better target for minimal problems or better accuracy or whatever. Insights and experience appreciated. Link to comment Share on other sites More sharing options...
zzt Posted February 22, 2017 Share Posted February 22, 2017 CZ TS mags will not hold long loaded rounds. CZ chambers are normal length. The barrels have normal leads, unlike 2011 40 sw barrels. I load to 1.126" for several reasons. One, I was told early on that if I loaded to that length I'd have no feeding problems. Two, that's the OAL listed in several loading manuals. Three, it does work, where loading to SAAMI length, 1.135" causes some feed problems with certain bullets. Four, My 2011 40 likes that OAL with both MBX mags and the Infinity Gen 1 mags, so I don't have to load two different lengths for the two guns. Link to comment Share on other sites More sharing options...
Bullets Posted February 22, 2017 Share Posted February 22, 2017 3 hours ago, IHAVEGAS said: Learning, new gun & have not worked up something yet. Mine seems to pluck test at about 1.16 with Bayou 180 rnfp & the loads I had for a different gun (1.15 - 1.155) seem to work fine. That is not to say that perhaps 1.12 may not be a better target for minimal problems or better accuracy or whatever. Insights and experience appreciated. 180bbi won't plunk past 1.125 in my barrel. I go to 1.120 to avoid any problems with the variances. plated plunk ok at 1.145 but was getting a bunch of jams. Shortened it up and problem went away. Link to comment Share on other sites More sharing options...
kyojin Posted February 28, 2017 Share Posted February 28, 2017 I've been playing around with 3 different loads for Major and 1 load for 3 Gun. X-Treme Bullet 180gr HP loaded with Titegroup 4.2gr to 1.120 is 167PF X-Treme Bullet 180gr HP loaded with N320 4.7gr to 1.120 is 172pf X-Treme Bullet 220gr loaded with Titegroup 3.7gr to 1.120 is 168 pf X-Treme Bullet 180gr HP loaded with Titegroup 3.0gr to 1.120 is 104pf I've only had this gun for a few weeks and am still playing around with bullet weights and powders. So far i'm really liking the 220gr with 3.7gr Titegroup. Very soft but still cycles the gun well with a 12lb recoil spring. Link to comment Share on other sites More sharing options...
Milkcoma Posted March 3, 2017 Share Posted March 3, 2017 180 Grain blue bullet 4.1grain of titegroup. 1.15 oal Link to comment Share on other sites More sharing options...
Superpipe9 Posted April 26, 2017 Author Share Posted April 26, 2017 First batch loaded up this past weekend was. Got 2" group at 20yrds. Ran stock springs without the buffer. 4.5gr ramshot competition 180 blue bullet 1.133 OAL 175.5 PF Link to comment Share on other sites More sharing options...
Hi_Im_Vinh Posted April 26, 2017 Share Posted April 26, 2017 200gr ACME coated bullet 4.0gr Win231 1.115 OAL 175 PF Link to comment Share on other sites More sharing options...
SDM Posted April 26, 2017 Share Posted April 26, 2017 180 Blue bullet, 1.135, 4.5gr of W231 or HP38. Has made 172-174 pf at every match I've shot since 2011... except last week at the A6 match it made 164.3. Link to comment Share on other sites More sharing options...
IHAVEGAS Posted April 26, 2017 Share Posted April 26, 2017 1.15 oal, 5.2 power pistol, 180 grain bayou. TSO. Haven't shot thousands of them yet, but after 200 or so, zero issues and good for A zone head shots at 25 yards when i do my part correctly. Tried a couple hundred 1.13 5.0 as well, zero issues also but not checked for accuracy, prefer 1.15 to be certain that brass always stops on the fat part of the bullet. Link to comment Share on other sites More sharing options...
rowdyb Posted April 26, 2017 Share Posted April 26, 2017 (edited) 180gr plated bullet. 4.70 titegroup. mixed brass. Win spp. 1.130" oal. yields 170pf. Edited April 26, 2017 by rowdyb Link to comment Share on other sites More sharing options...
Superpipe9 Posted April 26, 2017 Author Share Posted April 26, 2017 3 hours ago, SDM said: 180 Blue bullet, 1.135, 4.5gr of W231 or HP38. Has made 172-174 pf at every match I've shot since 2011... except last week at the A6 match it made 164.3. There's never a good time for that but a area much!!! Geez that sucks! Link to comment Share on other sites More sharing options...
FlightMedic376 Posted May 19, 2017 Share Posted May 19, 2017 180gr Blue Bullet 4.3 Titegroup 1.13 OAL CCI primers Mixed Range brass 175 PF out of my Tac Sport Orange Link to comment Share on other sites More sharing options...
IronicTwitch Posted May 19, 2017 Share Posted May 19, 2017 180gr Xtreme RNFP 1.125" 4.5gr WST 170PF at 50 degrees Link to comment Share on other sites More sharing options...
JayDee Posted May 19, 2017 Share Posted May 19, 2017 180 Rainier plated RNFP 4.9 grains N320 OAL 1.15" 169 PF Link to comment Share on other sites More sharing options...
GJGary Posted May 23, 2017 Share Posted May 23, 2017 (edited) 200gr bbi and 200gr acme Both 1.155oal 4.0-4.1 wst 3.8 ramshot competition 168pf Barrel reamed and max mag length No issues with anything Edited May 23, 2017 by GJGary Link to comment Share on other sites More sharing options...
ARMAGEDON Posted May 23, 2017 Share Posted May 23, 2017 i use 180gr blue bullet with no problems Link to comment Share on other sites More sharing options...
ARMAGEDON Posted May 23, 2017 Share Posted May 23, 2017 Recently changed to SNS cast bullets (coated) Link to comment Share on other sites More sharing options...
Superpipe9 Posted May 24, 2017 Author Share Posted May 24, 2017 Man these 180grblue bullets are really accurate in my cz TSO. If you guys want to give them a try, use code (moser) for a discount. This might be the best shooting gun and most accurate load I've ever had. Link to comment Share on other sites More sharing options...
ArrDave Posted May 26, 2017 Share Posted May 26, 2017 On 4/25/2017 at 11:17 PM, Superpipe9 said: First batch loaded up this past weekend was. Got 2" group at 20yrds. Ran stock springs without the buffer. 4.5gr ramshot competition 180 blue bullet 1.133 OAL 175.5 PF Book max on RS Comp for 180 L TC is 3.3 - you're like 30% over max - just an FYI. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now