gerritm Posted December 12, 2016 Share Posted December 12, 2016 Won 2K of these primes at a match. 5.56 Nato Mil-Spec SRP. I use regular CCI SRP in my 38 super major load for my DVC. Will these work? Supposed to be harder to prevent slam fires. I don't load 5.56 anymore. gerritm Link to comment Share on other sites More sharing options...
yoshidaex Posted December 12, 2016 Share Posted December 12, 2016 I'd say load up 100 of them and test it out. If it lights off with your current hammer/main spring, you're gtg. If your hammer/main spring is high enough, it should light off with no issues. Link to comment Share on other sites More sharing options...
abb1 Posted December 15, 2016 Share Posted December 15, 2016 The problem is that most open guns have reduced power main springs, which is why I opt NOT to use SRP. CCI makes hard primers to begin with, even if you test them and they seem fine, you may still end up with a light strike. I would not risk it, or use the CCI SRP for practice only, but not for matches. Link to comment Share on other sites More sharing options...
Bkreutz Posted December 15, 2016 Share Posted December 15, 2016 See if you can sell them locally, #41's are more expensive than #500 or #550. If you have an extended firing pin you shouldn't have a problem but why subject your pin to that kind of abuse? I bought 10K and had problems. I sold them to a 3 gunner who was happy to get them and went back to SPP. No problems since and that's been over a year. Link to comment Share on other sites More sharing options...
lightfighter363 Posted December 16, 2016 Share Posted December 16, 2016 I used CCI no problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now