MrRick Posted December 2, 2016 Share Posted December 2, 2016 So after last match, I noticed how bad my mount in my DVC is getting hit by brass. I think if I tune my ejector it should be good but I don't want to change anything in the gun (internals). It runs 100% with my 2 170mm mags (still need to tune my 140mm) and don't want to change/jeopardize that. I also get flash burns underside of the mount. Been thinking about lowering the dot, but not really needed. Due to my eye sight, I still have to partially close my left eye to pick up the dot. So been reading a few things about different dots and mounts. Looking for the experienced opinions. So with the other dots (really like the Deltapoint Pro) and the 90* mounts, is flash an issue that might block the sight picture or "burn" the C-More? My loads are with 3n37 and AA7 I also heard that some of the 90* mounts are not true center to the bore, true? Anything else that can be added would be great because I am 100% sure I'm forgetting something. Link to comment Share on other sites More sharing options...
cecil Posted December 2, 2016 Share Posted December 2, 2016 I installed a 90 degree mount on all my STI pistols... no more dings on the scope mount & what is more important... NO MORE JAMS .. Link to comment Share on other sites More sharing options...
teros135 Posted December 2, 2016 Share Posted December 2, 2016 The Cheely offset slideride mount solved my (similar) problem. It's offset by about .200", which isn't noticeble at all. Adapted right away. Their RTS2 mount is also slightly offset, no problems. Link to comment Share on other sites More sharing options...
Foxbat Posted December 2, 2016 Share Posted December 2, 2016 No big deal, happens all the time. Link to comment Share on other sites More sharing options...
ScottieShootz Posted December 2, 2016 Share Posted December 2, 2016 Ive seen other people file the corner of the mount down to help deflect any cases out of the way. Link to comment Share on other sites More sharing options...
Glk21C Posted December 2, 2016 Share Posted December 2, 2016 I agree with Foxbat Link to comment Share on other sites More sharing options...
MrRick Posted December 2, 2016 Author Share Posted December 2, 2016 9 hours ago, ScottieShootz said: Ive seen other people file the corner of the mount down to help deflect any cases out of the way. Might just do this to clean it up a bit. Thanks for for the inputs. Link to comment Share on other sites More sharing options...
Expflier Posted December 4, 2016 Share Posted December 4, 2016 Wow I can't believe it's running with that many marks. I got tired of the stovepipes and went to a 90 mount. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now