colt1911 Posted November 28, 2016 Share Posted November 28, 2016 So i just picked up a 300 BLK SBR and I would love to learn how to neck 223 cases to 300 blk. Does anyone know of any resources out there to provide information on doing that? Thanks! Link to comment Share on other sites More sharing options...
Paul-the new guy Posted November 28, 2016 Share Posted November 28, 2016 youtube Link to comment Share on other sites More sharing options...
The Donald Posted November 28, 2016 Share Posted November 28, 2016 For the amount of work it is to make 300 BLK cases, I just buy a 1000 ready to load cases, then catch them in a brass catcher I put on my rifle. Same as my 6.8 SPC. Link to comment Share on other sites More sharing options...
Nathanb Posted November 29, 2016 Share Posted November 29, 2016 Easy way? Dillon rt1500 and the carbide die from Dillon. I can do about 600 cases an hour on it. It's he primer pocket reaming I hate. Link to comment Share on other sites More sharing options...
Deathray Posted November 29, 2016 Share Posted November 29, 2016 That just means you need a 1050. Primer pocket swaging on the fly is worth the price of admission. Link to comment Share on other sites More sharing options...
Nathanb Posted November 29, 2016 Share Posted November 29, 2016 After the first thousand I seriously contemplated it Link to comment Share on other sites More sharing options...
wgj3 Posted November 30, 2016 Share Posted November 30, 2016 You can also do it with a tubing cutter and manual trimmer to trim to final length after running through a .300BO sizing die. Set the tubing cutter at the bottom of the shoulder and cut off the neck and shoulder. Run product through sizing die. Place sized product in trimmer to get to final length. Load. Link to comment Share on other sites More sharing options...
Smokecloud Posted December 1, 2016 Share Posted December 1, 2016 Order a 300blk Jig, just google it and pick one you like. I found one that did everything I needed for about $14. I bought a little miniature chop saw from harbor freight for about $30 on sale. Mount the jig in the chopsaw, it holds the case where it needs to be cut, which is just below the shoulder. You can play with the length to reduce how much trimming you have to do afterwards. Now you have a pile of straight walled cases, lube them and run them through a full length size die, it will form the shoulder the same time it sizes the rest of the case and deprimes. Now you trim to length, the rest is the same as any other rifle case. Link to comment Share on other sites More sharing options...
hceuterpe Posted December 1, 2016 Share Posted December 1, 2016 Also if u need to buy once fired brass, buy the blanks. They are MUCH cheaper[emoji4]Sent from my Pixel XL using Tapatalk Link to comment Share on other sites More sharing options...
colt1911 Posted February 25, 2017 Author Share Posted February 25, 2017 thanks to all who offered advice, i purchased a harbor freight chop saw and a squirrel daddy 300blk jig and i have been going to town making 300 blk, ive done around 500 rounds now and never realized how cheap 300 blk was compared with 5.56.... im saving around $30 and as much as $60 per 1000 rounds.... havent tried any reloads suppressed yet, we'll see how that goes..... Link to comment Share on other sites More sharing options...
Smokecloud Posted February 27, 2017 Share Posted February 27, 2017 With any suppressed load, always test the load on paper at some sort of extended distance to verify there is no key holing before you run it through your suppressor. Especially when you start playing with subsonic loads. Baffle strikes are easy to avoid if you just play it safe. Link to comment Share on other sites More sharing options...
Paul-the new guy Posted March 1, 2017 Share Posted March 1, 2017 On 2/25/2017 at 0:57 PM, colt1911 said: thanks to all who offered advice, i purchased a harbor freight chop saw and a squirrel daddy 300blk jig and i have been going to town making 300 blk, ive done around 500 rounds now and never realized how cheap 300 blk was compared with 5.56.... im saving around $30 and as much as $60 per 1000 rounds.... havent tried any reloads suppressed yet, we'll see how that goes..... what bullets are you using? It costs me a lot for 300 ammo because the bullets are expensive. Link to comment Share on other sites More sharing options...
Nathanb Posted March 1, 2017 Share Posted March 1, 2017 I only load subsonic because mine wears a can at all times. Palmetto projectiles makes a coated that I've used and currently loading pc bullets coated Link to comment Share on other sites More sharing options...
colt1911 Posted March 2, 2017 Author Share Posted March 2, 2017 16 hours ago, Paul-the new guy said: what bullets are you using? It costs me a lot for 300 ammo because the bullets are expensive. Right now im loading primarily some xtreme 150 grain Flat Points, they aren't the best for 300blk but they are cheap, and I've learned short flat points don't feed real great unless you load them long, and ive made them work just fine.... I ordered some hi-tek coated 220gr to try out for 120/k. The bullets are stupid expensive, but the area where i'm saving money over 5.56 is Powder, i get around 500+ rounds/lb for 300blk and only around 250/lb with 5.56. I've decided also that I'm going to load exclusively subs as well, because cheaper. Link to comment Share on other sites More sharing options...
dogtired Posted May 25, 2017 Share Posted May 25, 2017 I will load any 30 cal bullet I get cheap in the BLK. Link to comment Share on other sites More sharing options...
nate89 Posted May 25, 2017 Share Posted May 25, 2017 I have done the conversion, and unless you have an press mounted trimmer, for me, it just isn't worth it. I found someone on a facebook loading group who will take 223 brass and convert it for you and ship it back. For someone with no 1050 and no power trimmer, it has been a good deal. I try to find as much of my brass as possible, but i do end up losing some every range session. Link to comment Share on other sites More sharing options...
M1A4ME Posted May 26, 2017 Share Posted May 26, 2017 I bought 500 to start with. But I save every cracked neck/shoulder .223 piece of brass. When I get a little can of it sit down in the sun one cool spring/fall morning and work up some for with a tubing cutter, resizing die and case trimmer. My pile of 500 is slowly growing, but slowly growing is better than slowly dwindling. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now