bpipe95 Posted August 30, 2016 Share Posted August 30, 2016 I have a lighter sear spring from last round armorment, and I would like to buy another. However their site seems be down/gone. Are they still in business? If not does anyone else know where to get that spring? Thanks! Link to comment Share on other sites More sharing options...
emjei Posted August 30, 2016 Share Posted August 30, 2016 If you cant find one just get the one for CZs Sent from my SAMSUNG-SM-G900A using Tapatalk Link to comment Share on other sites More sharing options...
johnbu Posted August 30, 2016 Share Posted August 30, 2016 (edited) Yes, the standard CZ 75 sear spring is lighter than the tanfo version .$3 each https://cajungunworks.com/product/12-sear-spring/ Edited August 31, 2016 by johnbu Link to comment Share on other sites More sharing options...
PatriotDefense Posted August 31, 2016 Share Posted August 31, 2016 We should be rolling out our reduced power firing pin spring, reduced power trigger return spring, and reduced power sear spring by the end of the week. We also have a complete spring tuning kit that you guys have been asking for coming out as well to make your spring shopping needs easier. Be sure to check out our Vendor Forum as we'll update there. http://forums.brianenos.com/index.php?/forum/314-patriot-defense/ Link to comment Share on other sites More sharing options...
ryridesmotox Posted August 31, 2016 Share Posted August 31, 2016 PD... Don't forget about a reduced power plunger spring. Link to comment Share on other sites More sharing options...
SCTaylor Posted August 31, 2016 Share Posted August 31, 2016 Seriously Joe? I just got my order from y'all yesterday. Haha. Guess I'll have to get some of the new springs when they are ready. Link to comment Share on other sites More sharing options...
PatriotDefense Posted August 31, 2016 Share Posted August 31, 2016 ryridesmotox- the reduced plunger spring wrecks havoc with guys running the BOLO, plus we don't see much benefit in that once a proper trigger job is done, and of course a BOLO installed ? SCTaylor- just trying to make shopping a little easier for you guys Link to comment Share on other sites More sharing options...
ryridesmotox Posted August 31, 2016 Share Posted August 31, 2016 What havoc is that? I am using a cgw CZ firing pin spring. Everything works harmoniously. The reset is still very positive. I had previously used the click pen spring and didn't like that. https://cajungunworks.com/product/rp-fps-reduced-power-firing-pin-spring/ Link to comment Share on other sites More sharing options...
PatriotDefense Posted August 31, 2016 Share Posted August 31, 2016 Glad to hear, we've had the majority of issues with the DA short stroking caused by "lighter" or "clipped" springs in the trigger bar plunger. Mainly on the tighter newer guns, once they went back to factory springs they no longer blew through the DA and it's not even a real noticeable mod with a bolo installed. One thing for sure with tanfo's are you gotta get dirty and figure out what works in your particular gun. Link to comment Share on other sites More sharing options...
ryridesmotox Posted August 31, 2016 Share Posted August 31, 2016 (edited) I never had that problem with DA after I had the titan hammer. The bolo is very good. Probably the best mod for this gun. All the springs and stuff are just fine tuning. As for your last thing... I got mine in June. Its pretty new but it's been apart probably 50x to figure out what spring combinations I like for cartridges I'm using. Fine tuning... I'm a wee smidge ocd Edited August 31, 2016 by ryridesmotox Link to comment Share on other sites More sharing options...
johnbu Posted August 31, 2016 Share Posted August 31, 2016 You and me both ! 1 hour ago, ryridesmotox said: I never had that problem with DA after I had the titan hammer. The bolo is very good. Probably the best mod for this gun. All the springs and stuff are just fine tuning. As for your last thing... I got mine in June. Its pretty new but it's been apart probably 50x to figure out what spring combinations I like for cartridges I'm using. Fine tuning... I'm a wee smidge ocd Link to comment Share on other sites More sharing options...
bulm540 Posted August 31, 2016 Share Posted August 31, 2016 19 hours ago, PatriotDefense said: We should be rolling out our reduced power firing pin spring, reduced power trigger return spring, and reduced power sear spring by the end of the week. We also have a complete spring tuning kit that you guys have been asking for coming out as well to make your spring shopping needs easier. Be sure to check out our Vendor Forum as we'll update there. http://forums.brianenos.com/index.php?/forum/314-patriot-defense/ sweet Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now